Kurzweil K2600 - MUSICIANS GUIDE REV A PART NUMBER 910330 CHAP 16 User Manual

16-26
DSP Functions
The DSP Functions
When youÕre using the Parametric EQ, you might use the following sequence. Set the center
frequency (press the F1 FRQ soft button to select its control-input page). The frequency is
measured in terms of each note of the keyboard. The frequency in Hertz of each note appears
with the note name as the value for the Adjust parameter. Next, select the width control-input
page (the F2 WID soft button) to determine how wide a range will be affected by the amplitude
adjustment. Then select the amplitude control-input page (F3 AMP soft button), and adjust the
amplitude of the range you speciÞed with the center frequency and width settings. YouÕll
Amplitude in dB
Frequency in Hertz
10
100
1K
10K
-10
0
-20
-30
-40
-50
-
∞
3 dB attenuation
Width
-60
-50
-40
-30
-20
-10
0
10
20
10 100 1000 10000 100000
Frequency in Hertz
Amplitude in dB
Cutoff frequency = C 6;
width = 2 octaves;
gain at -96, -18, -12, -6, 0, 6, 12, 18 dB
-6
-18
-96
18

Kurzweil K2600 - MUSICIANS GUIDE REV A PART NUMBER 910330 CHAP 16 Specifications

General

Mixer Type	Digital
Number of Output Channels	8
Effects Processing	Yes
MIDI Control	Yes
Sampling Rate	48kHz
EQ Bands per Channel	4