EasyManua.ls Logo

Kurzweil K2600 - MUSICIANS GUIDE REV A PART NUMBER 910331 CHAP 10 - Page 30

Kurzweil K2600 - MUSICIANS GUIDE REV A PART NUMBER 910331 CHAP 10
184 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10-30
KDFX Reference
KDFX Algorithm Specifications
Page 3
Page 4
Wet/Dry The relative amount of input signal and effected signal that is to appear in the Þnal effect
output mix. When set to 0%, the output is taken only from the input (dry). When set to
100%, the output is all wet.
Out Gain The overall gain or amplitude at the output of the effect.
Feedback The amplitude of the feedback tap(s) fed back to the beginning of the delay.
FB2 / FB1>FB Balance control between feedback line 1 and line 2. 0% turns off feedback line 2 only
allowing use of feedback line 1. 50% is an even mix of both lines, and 100% turns off line 1.
HF Damping The amount of high frequency content of the signal to the input of the delay. This control
determines the cutoff frequency of the one-pole (-6dB/octave) lowpass Þlters.
Diff Dly Left and Right. Adjusts delay length of the diffusers.
Diff Amt Adjusts the diffuser intensity.
L Fdbk1 Dly Adjusts the delay length of the left channelÕs feedback tap fed back to the left channelÕs
delay input.
L Fdbk2 Dly Adjusts the delay length of the left channelÕs feedback tap fed back to the right channelÕs
delay input.
R Fdbk1 Dly Adjusts the delay length of the right channelÕs feedback tap fed back to the right channelÕs
delay input.
R Fdbk2 Dly Adjusts the delay length of the right channelÕs feedback tap fed back to the left channelÕs
delay input.
Tap n Dly Left and Right. Adjusts the delay length of the left and right channelÕs three output taps.
Tap n Lvl Left and Right. Adjusts the listening level of the left and right channelÕs three output taps.
Tap n Pan Left and Right. Adjusts the equal power pan position of the left and right channelÕs three
output taps. 0% is center pan, negative values pan to left, and positive values pan to the
right.
L Tap1 Dly 0 to 2600 ms R Tap1 Dly 0 to 2600 ms
L Tap2 Dly 0 to 2600 ms R Tap2 Dly 0 to 2600 ms
L Tap3 Dly 0 to 2600 ms R Tap3 Dly 0 to 2600 ms
L Tap1 Lvl 0 to 100 % R Tap1 Lvl 0 to 100 %
L Tap2 Lvl 0 to 100 % R Tap2 Lvl 0 to 100 %
L Tap3 Lvl 0 to 100 % R Tap3 Lvl 0 to 100 %
L Tap1 Pan -100 to 100 % R Tap1 Pan -100 to 100 %
L Tap2 Pan -100 to 100 % R Tap2 Pan -100 to 100 %
L Tap3 Pan -100 to 100 % R Tap3 Pan -100 to 100 %

Related product manuals