Kurzweil PCR-1 - Using Sound Categories (PC2 R only)

8
PCR-1 User’s Guide
PC2 Version 3 Operating System Features
Global buttons at the same time. The top line of the
display shows
DEMO:
followed by the ID and name of
the currently selected demo song.
2. Use the Alpha Wheel or the Minus or Plus button to
select the desired demo. If you’re going to dump the
demo, make sure you have a MIDI connection between
the MIDI Out of the PC2 and the MIDI In of the
receiving device.
3. Press Store (on keyboard models) or Edit/Store (on
rack-mount models). The PC2’s display asks you if you
want to delete the current demo.
4. Skip to Step 5 if you want to dump the demo.
Otherwise press
Enter to delete the demo. When it’s
gone, the display shows
Deleted!
If you decide not
to delete the demo, press Cancel instead of Enter ; this
returns you to Demo mode.
5. Press the Right cursor button. The display asks if you
want to dump the current demo.
6. Press Enter to start the dump. On keyboard models,
the LED in the MIDI Xmit button lights to indicate the
data flow. When the dump is finished, the display
shows
Demo|Dumped!
briefly, then returns to the
Dump|Demo?
prompt.
Using Sound Categories (PC2R only)
The PC2R doesn’t have the Sound Select buttons that are
featured on the keyboard models, but you can still make use
of the sound categories.
1. Press the Group/Menu button to display the list of
categories.
2. Use the Alpha Wheel to select a category.
3. Press Enter . This selects the first program in the
category, and returns the display to normal.
The length of the list of categories depends on which set of
programs you’ve installed in ROM/loaded in RAM. When
you install/load the GM set, 16 new categories appear in a
continuous block immediately before the User category