Kurzweil SP4-8 - Tutorial: Saving Edited Setups; Step 4: Save the Edited Program; Step 5: Verify User Program Status; Step 6 & 7: Repeat and Save Setup

SP4 V2 Addendum
Global Mode
9
4. OntheEditProg:Savepage(seebelow),anunuseduserIDnumberisautomatically
selectedtosavetheprogram.(YoucanchooseadifferentIDnumberifdesired.)Pressthe
SavesoftbuttontosavetheprogramattheselectedIDnumberasausereditedprogram.
Thedisplaywillquicklyshow
themessage“Savesuccessful”,thenyouwillbereturnedto
theEditProg:KEYMAPpage(ortheEditProg:PARAMETERSpageonthePC3LE).
5. OntheEditProg:KEYMAPpage(ortheEditProg:PARAMETERSpageonthePC3LE),
presstheexitbuttonandyouwillbereturnedtotheSetupMode:CH/PROGpage.Onthe
SetupMode:CH/PROGpage,lookat
theprogramIDnumberandnameintheProgram
field.TheprogramIDnumberandnameshouldnowhaveanasterisk(starsymbol)at
theirleft,whichmeansthezoneusesauserprogram(seebelow).
6. Repeatsteps3through5forzones2,3,and4ofthesetup,then
continuetostep7.
7. OntheSetupMode:CH/PROGpage,presstheExit buttontotherightofthedisplay.This
willbringyoutotheSetupMode:Exitpagewhereyouwillbepromptedtosavethesetup
youhavejustedited(seebelow).PresstheYessoftbutton,thiswillbringyouto
the
SetupMode:Savepage.