Kurzweil SP4-8 - Tutorial: Saving Setups For SP4; Step 1: Navigate to Setup Mode; Step 2: Edit Setup Mode Details

SP4 V2 Addendum
Global Mode
7
Tutorial: Save A Setup From The PC3K, PC3, Or PC3LE To Load To The SP4
ToloadasetupfromthePC3K,PC3,orPC3LE,theobjectfilecontainingthesetupmustalso
containtheprogramsusedinthesetup.ThiscanbedoneonthePC3K,PC3,orPC3LEbysaving
thesetupobjectfilewith“dependentobjects”.Inordertosavesetupobject
filewith“dependent
objects”,thesetup’sfirstfourzonesmustcontainusereditedprograms.Toensurethatsetups
createdonthePC3K,PC3,orPC3LEcanbeloadedbytheSP4,followthesesteps:
1. OnthePC3K,PC3,orPC3LE,presstheExitbuttonuntilyoureachtheProgrammode
main
page.FromtheProgrammodemainpage,presstheSetupmodebuttontogotothe
Setupmodemainpage(seebelow),thenselecttheSetupthatyouwishtosave.
2. Withthedesiredsetupselected,presstheEditbuttontotheleftofthedisplay.Thiswill
bringyouto
theSetupMode:CH/PROGpagewhereyoucanviewtheprogramselected
forthecurrentzoneintheProgram field(seebelow).