Need help?Do you have a question about the Kuzma Stabi S and is the answer not in the manual?
Provides detailed technical specifications for the Stabi S turntable, including mass, platter weight, motor type, and dimensions.
Lists all included components and optional accessories provided with the turntable for unpacking and initial setup.
Positioning the lid, T base, and motor tower correctly for stable assembly and operation.
Adding bearing oil to the T base and installing the subplatter onto the spindle.
Fitting the drive belt, connecting power, and carefully placing the platter for operation.
Ensures the turntable is perfectly horizontal and tidies the mains cable for optimal playback and signal integrity.
Step-by-step guide for mounting the Stogi tonearm, including pillar adjustment for VTA and correct positioning.
Instructions for fitting alternative tonearms using the brass armbase, including VTA adjustment and potential lid fit issues.
Information on starting platter rotation and how to switch between 33 and 45 RPM using the crown pulley adaptor.
Details on making fine speed adjustments and setting the Vertical Tracking Angle (VTA) for optimal record playback.
Simple instruction on how to properly place the brass clamp on top of the record during playback.
Guidance on cleaning the mat, maintaining the bearing oil, and periodic cleaning/replacement of the drive belt.
Information on optional upgrades such as second tonearm adaptors, power supplies, and different tonearm lengths.
Solutions for issues like the platter not rotating or experiencing a very slow start, checking belt tension and connections.
Instructions for safely transporting the turntable, including securing parts and using original packaging for protection.
General| Drive System | Belt drive |
|---|---|
| Tonearm Compatibility | 9-inch tonearms |
| Motor | AC synchronous motor |
| Signal-to-Noise Ratio | >80 dB |
| Speed | 33.3 RPM, 45 RPM |
| Platter | Aluminum |
| Tonearm | Not included |
To Next Page
