KVH, TracPhone, TracVision, TracNet, and the unique light-colored dome with dark contrasting baseplate (Reg. No. 2,864,752) are
trademarks of KVH Industries, Inc. All other trademarks are property of their respective companies. The information in this
document is subject to change without notice. No company shall be liable for errors contained herein.
© 2022 KVH Industries, Inc., All rights reserved. 54-1468 Rev. A
1
TracPhone V30/TracNet H30
24" (60 cm) Dome with Tapered Baseplate
Installation Addendum
The following instructions explain how to install the TracPhone
®
V30 or TracNet
™
H30 antenna inside the 24" (60 cm)
dome, which matches the TracVision
®
TV6 and UHD7.
Tools Required
In addition to items provided in the kitpack and the items
listed in the Installation Guide, this procedure requires the
following tools and materials:
• Flat-head and Phillips screwdrivers
• Torque wrench and sockets
• Socket wrenches
• Electric drill and 5/8" (16 mm) drill bit
• 1.5" (38 mm) hole saw
• Light hammer and center punch
• Adhesive tape
• File
•Shop towels
Steps
Prepare the Mounting Site................................................. 2
Remove the Shipping Restraints ....................................... 3
Mount the Antenna ............................................................ 4
Figure 1: Antenna Dimensions
IMPORTANT!
These instructions supplement but do not replace the
Installation Guide. Be sure to follow all instructions
provided therein that are not superseded by this
addendum.
Technical Support
Within Continental U.S.A.: 1 866 701-7103
Worldwide: +1 401 851-3806
Email: mvbsupport@kvh.com
To Next Page
Need help?
General
