EasyManua.ls Logo

KW Metalltechnik Thermal-Imager A4 - User Manual

Default Icon
17 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
115 V/230 V-0107
Thermal-Imager
A4
User´s Manual

Questions and Answers

  • P
    phamamandaAug 1, 2025
    Why does the motor and fans keep running after copying on my KW Metalltechnik Thermal-Imager A4?
    • J
      John RoyAug 1, 2025
      If the motor and fans continue to run after copying, do not switch off the device. Cooling is in progress.
  • K
    kevin18Aug 12, 2025
    What to do if the illumination lamp doesn’t work on my KW Metalltechnik Thermal-Imager A4?
    • P
      pruittandrewAug 12, 2025
      If the illumination lamp isn’t working but the green LED is lit, there could be several reasons: * The device may be too hot; wait up to 20 minutes for it to cool down. * The lamp itself might be broken; contact your local sales office for a replacement. * The lamp's fuse could be broken; replace it with the same type and value, referring to the technical data and security advice.
  • A
    Anthony LeeAug 21, 2025
    How to fix a KW Metalltechnik Thermal-Imager A4 when the green LED doesn’t light?
    • S
      Scott HernandezAug 21, 2025
      If the green LED doesn’t light, check the following: 1. Ensure the power cord is properly connected to a suitable electrical outlet. 2. Verify the fuse of the electrical outlet is functional; replace it or set it to ‘ON’, ensuring correct current ratings. 3. If the above steps don't work, the electronic unit inside the thermal imager might be defective; contact your local sales office.

Summary

Declaration of Conformity

Important Hints

Security Advices

Electrical Safety

Ensures safe operation through proper grounding and outlet usage as per safety requirements.

The Right Location

Unpacking and Installation

Using the Thermal-Imager

Power Up

Instructions for powering on the device and checking the ready indicator LED.

Speed Control

Guide to adjusting the illumination speed setting for desired copy darkness.

Insert Document

Procedure for correctly inserting documents into the slot for copying.

Cooldown Process

Details on the post-operation cooling phase, emphasizing not to switch off the device.

Copying

Guidance on masters and using original materials for optimal copying results.

Carriers

Importance of using correct carriers, their role, and replacement advice.

Cleaning

Cleaning of the Glass Cylinder

Step-by-step instructions for cleaning the glass cylinder with isopropyl alcohol.

Cleaning of the Housing

Troubleshooting

Warranty

Technical Data

KW Metalltechnik Thermal-Imager A4 Specifications

General IconGeneral
BrandKW Metalltechnik
ModelThermal-Imager A4
CategoryPrinter
LanguageEnglish