To Next Page
P
phamamandaAug 1, 2025
Why does the motor and fans keep running after copying on my KW Metalltechnik Thermal-Imager A4?
- JJohn RoyAug 1, 2025
If the motor and fans continue to run after copying, do not switch off the device. Cooling is in progress.
Why does the motor and fans keep running after copying on my KW Metalltechnik Thermal-Imager A4?
If the motor and fans continue to run after copying, do not switch off the device. Cooling is in progress.
What to do if the illumination lamp doesn’t work on my KW Metalltechnik Thermal-Imager A4?
If the illumination lamp isn’t working but the green LED is lit, there could be several reasons: * The device may be too hot; wait up to 20 minutes for it to cool down. * The lamp itself might be broken; contact your local sales office for a replacement. * The lamp's fuse could be broken; replace it with the same type and value, referring to the technical data and security advice.
General| Brand | KW Metalltechnik |
|---|---|
| Model | Thermal-Imager A4 |
| Category | Printer |
| Language | English |
Ensures safe operation through proper grounding and outlet usage as per safety requirements.
Instructions for powering on the device and checking the ready indicator LED.
Guide to adjusting the illumination speed setting for desired copy darkness.
Procedure for correctly inserting documents into the slot for copying.
Details on the post-operation cooling phase, emphasizing not to switch off the device.
Guidance on masters and using original materials for optimal copying results.
Importance of using correct carriers, their role, and replacement advice.
Step-by-step instructions for cleaning the glass cylinder with isopropyl alcohol.