To Next PageTo Next PageWhy is my KW Industrial Equipment cooling poorly?
Poor cooling in your KW Industrial Equipment can be due to several factors: * If the ambient temperature is above +30°C, ensure proper room ventilation and check the environment's temperature. * A dirty condenser can also cause poor cooling, so clean the condenser. * Excessive hot material inside the unit may be the problem. Wait a few hours or remove the material.
What to do if the door of my KW KLAB will not close?
If the door of your KW Industrial Equipment won't close, consider the following: * Icing on the linings may be preventing closure. Remove any ice and record the hinges (ASS KW). * Objects protruding from inside the case could be obstructing the door. Remove any such items.
What to do if launching KW KLAB Industrial Equipment triggers the switch QE?
If launching your KW Industrial Equipment triggers the QE switch, it could be due to: * A short circuit in the unit. Search for the short call and the Ass. KW. * Earth leakage in the system. Search losses and call the Ass. KW.
How to fix a KW Industrial Equipment chart recorder that is not working properly?
To fix a malfunctioning chart recorder on your KW Industrial Equipment: * If the paper isn't scrolling, check and replace the battery. * If it's not writing the °T, check and replace the pen. * If there is no movement, call l’ASS. KW.
Important information about safe installation, operation, maintenance, and liquidation.
Overview of the KLAB-BBR series features and control panel.
Detailed specifications, including model, temperature, capacity, dimensions, and power.
List of optional accessories available for the KLAB-BBR series.
Features and benefits of the advanced KLAB-BBR ADV series.
Technical specifications for the KLAB-BBR ADV models.
Electrical safety, grounding, installation requirements, and warnings.
Setting, leveling, connection, intended use, noise, and warnings.
Step-by-step guide for turning on the unit for the first time.
Adjusting temperature, handling alarms, and probe systems.
Monitoring unit operation, indicators, and manual defrosting procedures.
Reference for operating an optional temperature recorder.
Details on temperature alarms, open door alarms, backup battery, and remote alarms.
A table listing common issues, their causes, and suggested remedies.
Reference to attached diagrams and the list of operational parameters.
Warnings for technicians and instructions for condenser cleaning.
Procedures for cleaning the cabinet interior/exterior and removing frost.
Steps for cleaning and preserving the unit during extended periods of non-use.
Information on obtaining technical assistance and authorized service centers in Italy.
List of common spare parts and their constructors.
Guidelines for disposal of refrigerating equipment, electrical waste, and packaging.
Statement on the absence of hazardous materials as per RoHS directive.
Details shown on the CE compliance plate, including technical data.
Official declaration that the apparatus conforms to EU directives and standards.
Details of the warranty period, coverage, exclusions, and validity.
Instructions for proper packaging and handling during transport.
General| Series | KLAB |
|---|---|
| Application | Laboratory and industrial applications |
| Material | Stainless steel |
| Power Supply | 220V/50Hz |
| Control System | PID control |
| Safety Features | Over-temperature protection |
