NZ328 Rev. 9/18/18
ASSEMBLY INSTRUCTIONS FOR 7E201 PORTABLE BACKSTOP
1. Unpack all parts and check for damage that may have occurred during shipping. If damage has occurred,
notify Kwik Goal immediately. Lay out all parts. Remove all cardboard and packaging immediately. Wet or
damp packaging may damage contents.
2. Read through entire instruction before beginning assembly and installation.
NOTE: Components may be packaged in one or more additional boxes.
140 Pacific Drive Quakertown, PA 18951
(P) 215-536-2200 / (P) 800-531-4252 / (F) 215-536-4309 / (F) 800-778-8869
Visit our website @ kwikgoal.com
2011 Rev 2018 Kwik Goal Ltd.
Parts
WARNING
THIS EQUIPMENT MUST BE STORED IN A SECURED, SHELTERED AREA WHEN NOT IN USE OR IN THE
THREAT OF HIGH WINDS. ANY WEATHER DAMAGE TO THIS EQUIPMENT WILL NOT BE COVERED
UNDER KWIK GOAL’S LIFETIME GUARANTEE. DO NOT LEAVE THIS EQUIPMENT UNATTENDED.
Brace (2)
(Part# UZ1295)
Heavy Duty
Anchor Bag (16)
(Part# 10B7011)
Base (4)
(Part# UZ1279)
Bottom Bar (3)
(Part# UZ1280)
234-1/2”
Upright (4)
(Part# UZ1278)
186”
To Next Page
Need help?
General
