Kwik Mark KM-64 - Set Batch Count Function

Section 3.0 - Quick Reference Guide
Work Safely. Always wear safety glasses near the machine.
F7
Set Batch Count
Setup, enable and disable
Batch Count Mode
Job Must be Loaded
F7
ENT
ESC
When set, the count will display Quantity
Run/Quantity Set values
SPACE BAR
JOB LOADED
Ready
To Run
SPACE BAR to:
Run & Pause
After 25
Cycles
F7
ESC
Press ESC after F7 to
exit Batch Count Mode
ESC
JOB LOADED
Ready
To Run
No More
Batch Count
Mode
SPACE BAR
SPACE BAR to:
Run & Pause
No More
Batch Count
Mode
Press ESC here to
reset Batch Count Mode