KwikGoal 30B0901 - User Manual

NZ435 Rev. 04/26/18
140 Pacific Drive Quakertown, PA 18951
(P) 215-536-2200 / (P) 800-531-4252 / (F) 215-536-4309 / (F) 800-778-8869
Visit our website @ kwikgoal.com
2018 Kwik Goal Ltd. ©
INSTRUCTIONS FOR 30B0901 SHOE DRYER
1. Unpack all parts and check for damage that may have occurred during shipping. If damage has occurred,
notify Kwik Goal immediately. Lay out all parts. Remove all cardboard and packaging immediately. Wet or
damp packaging may damage contents.
2. Before operating this shoe dryer, please read these instructions and retain for future reference.
Upright Tubes (2)
Base (1)

Summary

Shoe Dryer Setup and Initial Steps

Unpacking and Damage Inspection

Inspect all parts for shipping damage and notify Kwik Goal immediately.

Pre-Operation Reading

Read and retain operating instructions before using the shoe dryer.

Shoe Dryer Usage and Safety

Safety Warnings

Important safety precautions to prevent hazards and damage during use.

Assembly Instructions

Steps to assemble the shoe dryer by inserting upright tubes into the base.

Operation Guide

Guide on plugging in, setting time, and using drying and ozone functions.

Cleaning Procedure

Instructions for safely unplugging and cleaning the shoe dryer.

Overview

1. Function Description
2. Important Technical Specifications
3. Usage Features
4. Maintenance Features
5. Safety Warnings

The Kwik Goal 30B0901 Shoe Dryer is a device designed to dry and sanitize footwear. It consists of a base unit and two upright tubes, into which shoes or other small garments are placed for drying.

Function Description:

The primary function of this shoe dryer is to dry footwear using a controlled airflow and, optionally, to sanitize them using ozone. It is designed for indoor use and operates by circulating air through the upright tubes, which are inserted into the base. The device features a control panel with buttons for "POWER," "OZONE," and "DRYING," along with "TIME+" and "TIME-" buttons to adjust the drying duration. An LED display shows the set time.

Important Technical Specifications:

• Power Source: Standard household 120V A/C outlet.
• Time Range: The drying time can be set from 10 to 240 minutes.
• Ozone Function: The ozone cycle automatically shuts off after approximately 15 minutes.
• Components: The device includes a base (1) and two upright tubes (2).

Usage Features:

1. Assembly: The upright tubes are simply inserted into the base unit.
2. Power On: After plugging the unit into a standard 120V A/C outlet, press the "POWER" button. The "TIME" display will illuminate, showing a default setting of 120 minutes.
3. Setting Time: Use the "TIME+" or "TIME-" buttons to adjust the drying duration. The time can be set anywhere between 10 and 240 minutes.
4. Drying Cycle: To start the drying process, press the "DRYING" button. The "DRYING" indicator will turn on, signifying that the drying cycle has begun.
5. Ozone Function: To activate the sanitizing function, press the "OZONE" button. The "OZONE" indicator will turn on, and the ozone cycle will commence. This cycle runs for approximately 15 minutes and then automatically shuts off. If further sanitization is needed, the "OZONE" button can be pressed again.
6. Stopping Operation: To stop the drying cycle at any time, press the "POWER" button.

Maintenance Features:

• Cleaning: Before cleaning, always unplug the device from the wall outlet.
• Dust Removal: Use a vacuum cleaner to remove any excess dust from the top and rear grilles of the unit.
• Surface Cleaning: The exterior of the device can be wiped clean with a damp cloth.
• Damaged Power Cord: If the power supply cord becomes damaged, it must be replaced by the manufacturer, a service agent, or a similarly qualified person to prevent hazards.

Safety Warnings:

• Water Proximity: Do not use the dryer near bathtubs, showers, wash basins, or swimming pools.
• Immersion: Never immerse the dryer in water or other liquids. If it comes into contact with water, immediately unplug it.
• Ventilation: Do not cover the dryer with coats, clothing, blankets, or any other items that could obstruct airflow. Ensure that air can flow freely into and out of the grilles.
• Children: Do not allow children to use or handle the dryer without proper supervision.
• Indoor Use: The dryer is intended for indoor use only.
• Foreign Objects: Do not insert or allow foreign objects into any ventilation or exhaust openings, as this could cause electric shock, fire, or damage to the dryer.
• Packaging: Upon unpacking, check for any shipping damage. If damage is found, notify Kwik Goal immediately. Remove all cardboard and packaging, especially if wet or damp, as it could damage the contents.
• Retention of Instructions: Retain the instruction manual for future reference.

KwikGoal 30B0901 Specifications

General

Brand	KwikGoal
Model	30B0901
Category	Dryer
Language	English