Kygo A11/800 User Manual

ENGLISH

Basic Butons Operation
Power on: Press the multifunction buton for 2 seconds. When the blue LED blinks 2 times,
the headphones are turned on.
Power of: Press the multifunction buton for 3 seconds. The red LED will flash twice to indicate
that the headphones are turned of.
Volume up: slide the finger from “-” to “+” to increase volume.
Volume down: slide the finger from “+” to “-” to decrease volume
Previous track: slide the finger from “>” to “<” to go to the previous track.
Next Track: slide the finger from “<”to “>” to go to the next track.
Play/Pause:
OPTION : click on the touch panel to pause music, press again to restart.
OPTION : press the multifunction buton once, press again to restart.
3.5mm music line-in function: Connect audio line-in cable to 3.5mm audio jack for wired music.
(Phone call function can still be used in this mode). Before connecting your audio line, please
ensure that the headphones are powered OFF.
1. Connect the 3.5mm audio cable to the headphone and audio player.
2. Adjust volume of the audio player or music player to reach the desired level

Kygo A11/800 Specifications

General

Brand	Kygo
Model	A11/800
Category	Headphone
Language	English