Pairing
Pairing phone or devices:
•
Make sure the headphones are powered OFF.
• Press and hold the multifunction buton for 5 seconds.
• The red and blue LEDs will blink, and you will hear a smart voice saying that the
headphones are in pairing mode.
• Activate the Bluetooth function on your phone or device and select
Kygo A/ to connect.
Reconnect the last paired device:
Press the multifunction buton for 2 seconds. The headphones will enter repair mode and
search for the last connected device. If it isn’t connected within 10 seconds, the
headphones will enter regular pairing mode.
To Next Page
Loading...
Need help?
General
