ENGLISH
Pairing the headphone with Bluetooth® devices
1. Make the headphone- enter into the pairing mode (please refer to
above section)
2. Place the Bluetooth® headphone and Bluetooth® device (phone,
tablet, music device) within 1 meter from each other.
3. Activate the Bluetooth® function on your Bluetooth® device. Please
refer to the manufacturer’s manual for instructions on enabling
Bluetooth® on your device. Ater searched, select “KYGO A/” in
the device list on the Bluetooth® device.
4. If you are prompted for a password, enter the “0000” and press
“connect” (only some Bluetooth® devices will ask for a password).
To Next Page
Loading...