Kygo A3/600 - Troubleshooting; Connection and Availability Issues

ENGLISH

• Bluetooth pair and connection fail
Other mobile device or equipment has been connected before
connection, and has not let yet and Bluetooth cannot be switched
of. When connection feature is employed again, the Bluetooth device
will automatically search for this previously connected Bluetooth
device for connection. First turn of the Bluetooth feature of the
previously connected Bluetooth device and the next Bluetooth device
can search, pair and connect normally.
• The LED does not turn on and the Bluetooth device is not available
Bluetooth device has not operated for a long time, and may come
into dormant state. Press the MFB on the device for a longer time to
activate it.
Troubleshooting