Kygo E4/1000 User Manual

ENGLISH ENGLISH
12 13
Once charged, get your headset paired and connected to your Bluetooth
phone and/or other Bluetooth enabled device.
1. Turn off any Bluetooth devices previously paired with your headset.
2. Hold the multifunction button on your Kygo E4/1000 earphones for
5 seconds until BLUE and RED LEDs are blinking.
3. Turn on the Bluetooth feature on your phone or device and select
Kygo E4/1000. Enter “0000” as PIN if the device prompts for the code.
Bluetooth Pairing
If no device is paired after 150 seconds, the earphone will enter the
no connection-status. Previously connected devices will connect
automatically with your Kygo E4/1000 earphones if the Bluetooth feature
is turned on.
If you are experiencing other problems not listed here or you need help
with your device, you can send an email to info@kygolife.com and we’ll
support you.

Kygo E4/1000 Specifications

General

Brand	Kygo
Model	E4/1000
Category	Headphone
Language	English