Need help?Do you have a question about the KYLAND Technology SICOM3024P and is the answer not in the manual?
Explains text, CLI, and symbol conventions used throughout the manual.
Lists the available product documents for the series switches.
Provides information on how to obtain product documents.
Provides a general overview of the series switches, their applications, and design.
Lists the specific product models included in the series.
Details the abundant software features offered by the series switches.
Explains the different views available in the Command Line Interface (CLI).
Guides on accessing the switch via the console port using Hyper Terminal.
Details the procedure for accessing the switch using Telnet.
Explains how to access and log into the switch via its web interface.
Describes how to view basic switch information like MAC, IP, and model.
Details how to display port status, administration, link, speed, and duplex.
Explains how to view port statistics such as bytes, packets, and errors.
Covers viewing system runtime, CPU usage, memory, temperature, and time.
Details how to view and set the switch's IP address and gateway.
Explains configuration of project name, system name, location, and contact.
Guides on configuring port status, speed, flow control, and other settings.
Describes how to change the user password for the switch.
Explains the process of updating the switch's BootROM and system software.
Details how to query the available software versions and their status.
Explains how to back up and restore switch configuration files via FTP.
Details how to limit packet rates on ports to discard excess traffic.
Explains Virtual Local Area Networks (VLANs) and their configuration.
Details Private VLAN (PVLAN) for complex port traffic isolation.
Guides on configuring port mirroring for network monitoring and analysis.
Explains port trunking for load balancing and connection reliability.
Describes how to detect link anomalies on redundancy protocol-enabled ports.
Details configuring static multicast address tables for packet forwarding.
Explains Internet Group Management Protocol Snooping for multicast management.
Guides on Access Control List (ACL) for implementing access control.
Details the Address Resolution Protocol (ARP) for IP and MAC address mapping.
Explains Simple Network Management Protocol (SNMP) for network device management.
Details Kyland-proprietary redundancy protocols for network recovery.
Explains Spanning Tree Protocol (STP) and Rapid Spanning Tree Protocol (RSTP).
Describes enabling transparent transmission for RSTP/STP with other protocols.
Details Quality of Service (QoS) for differentiated services and traffic control.
Explains how to configure the aging time for MAC address entries.
Details Link Layer Discovery Protocol (LLDP) for link layer discovery.
Explains Simple Network Time Protocol (SNTP) for time synchronization.
Details the types of alarms supported by the switches and their configuration.
Explains how to configure alarms for port traffic rate or CRC errors.
Details GARP Multicast Registration Protocol (GMRP) configuration.
Explains Remote Network Monitoring (RMON) for network traffic statistics.
Guides on viewing and managing switch running logs.
Details configuring and querying static and dynamic unicast MAC addresses.
General| Switching Capacity | 8.8 Gbps |
|---|---|
| MAC Address Table | 8K |
| Humidity | 5% to 95% (non-condensing) |
| Ports | 4 x 100/1000Base-X SFP |
| Operating Temperature | -40°C to 75°C |
| Housing | Metal, IP40 protection |
| Mounting | DIN-Rail |
| Jumbo Frame | 9KB |
| Storage Temperature | -40°C to 85°C |
| Dimensions | 440 x 44 mm |
To Next Page
