CONTROLS & FEATURES
1
2
USB Power Socket
This vehicle is equipped with the accessory
USB power sockets which provide a function
to charge the mobile phone with capacity
compliance as below.
The USB sockets is in the center cap of the
handle bar.
Output: DC 5V 2A
Maximum output current: 2A
˙ To prevent fuse from being blown, do not
charge a product with a load exceeding 10W;
if overheat occurs during charging, the
system will cut off power supply automatically
˙After riding and before leaving the scooter,
make sure the product is unplugged and the
Protection Cap is properly covered back.
CAUTION
WARNING
˙ To avoid electrocution or short-circuit,
make sure to cover-up the protection cap
after using the USB Power Socket.
˙ To prevent any accident from occurring,
park your Scooter at a safe location before
using the USB Power Socket.
1
27
To Next Page
Loading...
Need help?
General
