EasyManua.ls Logo

KYMCO Kiwi 100 - Front;Rear Shock Absorber Inspection; Brake Performance Inspection; Rearview Mirror Angle Check; License Plate Check

KYMCO Kiwi 100
49 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
18
(11)FRONT/REAR SHOCK ABSORBER
INSPECTION
X Check the condition of the front/rear shock absorbers by
pressing down on the handlebar and seat several times.
(12) BRAKE PERFORMANCE INSPECTION
X Fully apply the front and rear brake levers and move the
motorcycle forward to see if the braking effect is good.
(13) REARVIEW MIRROR ANGLE CHECK
X Sit on the motorcycle uprightly and make a viewing test of
the rearview mirror angle.
(14) LICENSE PLATE CHECK
X Check the license plate for dirt and damage, then tighten
it.
(15) REFLECTOR CHECK
X Check the reflector for dirt and damage.
(16) PREVIOUS ABNORMAL PARTS
INSPECTION
X Make sure that the previous abnormal parts are repaired.
(17) LUBRICATION POINT CHECK
X Visually check if all motorcycle lubrication points are
lubricated properly.

Related product manuals