EasyManua.ls Logo

KYMCO MYROAD 700i User Manual

KYMCO MYROAD 700i
63 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
To avoid damage from the scooter's electronic fuel injection system, do not remove or
install the battery when the ignition switch is at the "ON" position.
The petrol could be caused the effects of deterioration from non-use or extended storage of the
vehicle that would cause the non-start situation. Service more frequently when operating in severe
conditions: environment, high speed frequent starting/stopping usage or extreme riding habit.
Make sure flammable materials such as dry glass or leaves do not come in contact with the
exhaust system when parking your scooter.
,
To avoid damage from the scooter's electronic fuel injection system, do not remove or
install the battery when the ignition switch is at the "ON" position.
The petrol could be caused the effects of deterioration from non-use or extended storage of the
vehicle that would cause the non-start situation. Service more frequently when operating in severe
conditions: environment, high speed frequent starting/stopping usage or extreme riding habit.
Make sure flammable materials such as dry glass or leaves do not come in contact with the
exhaust system when parking your scooter.
,
WARNING

Other manuals for KYMCO MYROAD 700i

Question and Answer IconNeed help?

Do you have a question about the KYMCO MYROAD 700i and is the answer not in the manual?

KYMCO MYROAD 700i Specifications

General IconGeneral
Displacement699.5 cc
Fuel SystemElectronic Fuel Injection
Cooling SystemLiquid-cooled
TransmissionCVT
Front SuspensionTelescopic fork
Rear BrakeSingle disc
Seat Height800 mm
Fuel Capacity15 liters
Front Tire120/70-15
Rear Tire160/60-14
ABSYes
Engine Type4-stroke, DOHC, 8-valve
Front BrakeDual Discs
Wheelbase1, 590 mm

Summary

Safety Warnings

Electronic Fuel Injection System Warning

Warning about removing/installing battery with ignition ON to prevent damage to the electronic fuel injection system.

Manual Introduction and Safety Icons

Understanding Safety Symbols

Explanation of SAFETY ALERT, WARNING, CAUTION, and NOTE symbols used in the manual.

Vehicle Identification

Identification Numbers Record

Section to record Vehicle Identification Number (VIN) and Engine Serial Number (ESN) for future reference.

General Scooter Safety

Essential Safety Practices

Covers wearing a helmet, being visible, knowing limits, and maintaining the scooter.

Protective Apparel and Riding Gear

Recommended Riding Gear

Details required protective apparel like helmets, eye protection, gloves, boots, and clothing.

Accessories and Modifications

Accessory Guidelines and Modification Warning

Advises caution with accessories and warns against modifying the scooter's design or operation.

Parts and Controls Location

Front Component Identification

Identifies front parts like fuel fill cap, rearview mirrors, switches, and instruments with numbered labels.

Parts and Controls Location

Mid-section Component Identification

Identifies mid-section controls like throttle grip, brake levers, fluid reservoirs, and ignition switch.

Parts and Controls Location

Lower/Rear Component Identification

Identifies lower and rear components like tool kit, compartment, stands, and air cleaner.

Parts and Controls Location

Seat and Electrical Component Identification

Identifies seat, fuse box, battery, and cell phone socket with numbered labels.

Ignition Switch Operation

Ignition Switch Positions and Functions

Explains the different positions of the ignition switch and their functions, including locking the steering.

Ignition Security Shutter

Operating the Ignition Security Shutter

Details how to open and shut the security shutter for the ignition switch and the importance of the key code.

Instrument Panel Layout

Dashboard Indicator and Gauge Identification

Identifies all indicators, gauges, and buttons on the multifunction instrument panel.

Instrument Panel Functions

Indicator Explanations (Part 1)

Explains the oil pressure, trip meter/odometer, battery charge, tachometer, and turn signal indicators.

Instrument Panel Functions

Indicator Explanations (Part 2)

Explains seat unlock, side stand, high beam, cell phone socket, coolant gauge, and oil service indicators.

Instrument Panel Functions

Indicator Explanations (Part 3)

Explains parking brake, Check Engine Lamp (CELP), ABS, and Cushion indicators.

Instrument Display Operations

Setting Units and Resetting Oil Service

Describes how to switch between miles/kilometers and reset the oil service indicator.

Instrument Display Operations

Trip Meter Reset and Time Adjustment

Details how to reset the trip meter and adjust the clock settings on the instrument display.

ABS System Introduction

ABS Indicator Light Functionality

Explains the ABS indicator light on the dashboard and what it signifies regarding system status.

ABS System Operation and Warnings

ABS Characteristics and Tire Warnings

Discusses ABS characteristics, limitations, and the importance of using recommended tires.

Clock Adjustment Procedure

Step-by-Step Clock Setting

Provides a detailed procedure for manually adjusting the time on the digital clock.

Right Handlebar Controls

Headlight Switch and Electric Starter

Explains the operation of the headlight switch and the electric starter button, including safety interlocks.

Handlebar Controls - Engine and Hazard

Engine Stop and Hazard Flasher Operation

Details the function of the engine stop switch and the hazard switch, including cautions for use.

Suspension Adjustment

Cushion Damper Adjustment

Explains how to adjust the cushion damper to soft, middle, or hard conditions using the adjustment button.

Left Handlebar Controls

Turn Signals, Horn, and Headlight Dimmer

Describes the operation of turn signal, horn, and headlight dimmer switches.

Parking Brake Operation

Applying and Releasing the Parking Brake

Details how to apply and release the parking brake, with warnings about hazardous use.

Fuel Fill Cap Operation

Opening, Closing, and Refueling Safety

Explains how to open and close the fuel fill cap, with warnings about refueling safety.

Fuel and Refilling Recommendations

Fuel Type and Level Monitoring

Advises on recommended fuel type and how to monitor fuel level using the indicator.

Seat Operation

Unlocking and Locking the Seat

Explains the procedure for unlocking and locking the scooter seat, with notes on indicators.

Scooter Compartments and Pedals

Foot Pedal and Center Compartment Usage

Details how to set the foot pedal and information about the center compartment, including weight limits and warnings.

Interior Compartment Features

Compartment Light and Power Socket

Explains the center compartment light and the 12V DC cell phone socket, including its specifications.

Suspension Adjustment

Rear Shock Absorber Preload Adjustment

Describes how to adjust the rear shock absorber spring preload and cautions regarding the adjustment sequence.

Pre-Ride Inspection

Essential Pre-Ride Checks

Lists critical checks before riding, including fluids, tires, controls, lights, and steering.

Starting the Engine

Engine Starting Procedure and Cautions

Details the steps to start the engine and provides cautions regarding the catalytic converter and starter motor.

Starting the Engine

Brake Lever Engagement and Warm-up

Explains the need to squeeze brake levers for starting and the engine warm-up process.

Importance of Maintenance

Benefits and Schedule Overview

Highlights the importance of maintenance for safety, economy, and environment, and introduces the maintenance schedule.

Maintenance Schedule

Scheduled Maintenance Intervals

Provides a schedule of inspections, cleaning, adjustments, and replacements based on mileage or time.

Maintenance Items and Frequency

Air Cleaner, Spark Plugs, and Engine Oil Services

Details maintenance for air cleaner, spark plugs, throttle, valve clearance, fuel line, crankcase breather, and engine oil.

Maintenance Items and Frequency

Transmission Oil, Drive Belt, and Brake Services

Details maintenance for transmission oil, drive belt, clutch shoe wear, brake fluid, pads, system, switches, and side stand.

Engine Oil Maintenance

Engine Oil Recommendation and Level Check

Provides recommendations for engine oil type, viscosity, and how to check the oil level.

Engine Oil Replacement

Procedure for Changing Engine Oil

Details the steps for draining and replacing the engine oil, including cautions.

Engine Oil Replacement

Adding Oil and Final Checks

Covers adding the correct amount of oil, starting the engine, and checking the oil level again.

Transmission Oil Change

Procedure for Changing Transmission Oil

Details the steps for draining and refilling the transmission oil with recommended lubricant.

Air Cleaner and Throttle Maintenance

Air Filter Servicing and Throttle Play Check

Explains air cleaner servicing and checking throttle grip free play for smooth operation.

Spark Plug Maintenance

Cleaning, Gap Adjustment, and Replacement

Describes how to clean, adjust the gap, and replace spark plugs, including cautions on selection.

Coolant Level Inspection

Checking Coolant Level in Reserve Tank

Details how to check the coolant level through the inspection window and add coolant if needed.

Coolant Replacement

Coolant Type, Ratio, and Cautions

Advises on replacing coolant, recommended types, mixture ratios, and safety precautions.

Side Stand Inspection

Interlock Functionality Check

Explains how to check the side stand's safety interlock feature that cuts off ignition when the stand is down.

Brake Fluid Maintenance

Brake Fluid Level and Hose Checks

Details how to check brake fluid levels and inspect hoses for leaks or deterioration, with warnings.

Brake Lever Adjustment

Adjusting Lever Position to Rider's Hands

Explains how to adjust the brake lever position using the adjuster knob for rider comfort.

Brake System Checks

Brake Pad and Shoe Wear Inspection

Describes how to inspect brake pads and shoes for wear and the importance of proper brake function.

Battery and Fuse Information

Battery Type and Fuse List

Provides information on the maintenance-free battery type and lists the specifications for various fuses.

Tire Maintenance and Safety

Tire Pressure and Condition Checks

Emphasizes checking tire condition, pressure, size, and wear for safe operation.

Washing and Cleaning Your Scooter

Cleaning Procedures and Finishing Touches

Outlines the correct procedure for washing the scooter and suggestions for finishing touches like polishing.

Emission Control Systems

Crankcase and Exhaust Emission Control

Explains the crankcase and exhaust emission control systems and the function of the catalyzer.

Scooter Specifications

Dimensions, Engine, Electrical, and Chassis Details

Lists key specifications including dimensions, engine type, capacities, electrical components, and chassis details.

Limited Warranty Information

Warranty Coverage, Exclusions, and Owner Obligations

Outlines the terms of the limited warranty, including coverage periods, exclusions, and owner responsibilities.

Related product manuals