KYMCO PEOPLE S 150 User Manual

MAINTENANCE
Transmission Gear Oil change
1. Stand the scooter by the center stand.
2. Remove the gear oil drain bolt ①.
3. Remove the gear oil filler bolt ②, and then slowly
rotate the rear wheel to drain the gear oil off.
4. Fill with the recommended oil to reach the capacity
listed below.
5. Install the transmission filler bolt and tighten it to
the specified torque.
Gear oil type: SAE 90
Full capacity: 0
.12 L
(0.11 US qt)
Exchange capacity: 0.
11L
(0.10 US qt)
CAUTION
Use the genuine engine oil or another with the
same quality and grade to avoid burnout on
the bearing or damage on the gear set.
CAUTION
Must follow the local regulation and obey the
related prohibition about the disposal of oil.
1
2
32
2
2

KYMCO PEOPLE S 150 Specifications

General

Fuel System	Electronic Fuel Injection
Cooling System	Air-cooled
Starter	Electric
Transmission	CVT
Front Suspension	Telescopic fork
Front Brake	Disc
Rear Brake	Disc
Length	2, 085 mm
Engine Type	Single-cylinder, 4-stroke
Max Power	13.5 hp @ 8, 500 rpm
Height	1130 mm
Fuel Capacity	7.5 liters
Rear Suspension	Twin shocks