KYMCO Super 8 50 Service Manual

1. GENERAL INFORMATION
1-4
SUPER 8 50
 Apply or add designated greases and
lubricants to the specified lubrication
points.
 After reassembly, check all parts for proper
tightening and operation.
 When two persons work together, pay
attention to the mutual working safety.
 Disconnect the battery negative (-) terminal
before operation.
 When using a spanner or other tools, make
sure not to damage the motorcycle surface.
After operation, check all connecting points,
fasteners, and lines for proper connection
and installation.
 When connecting the battery, the positive
(+) terminal must be connected first.
 After connection, apply grease to the
battery terminals.
 Terminal caps shall be installed securely.

KYMCO Super 8 50 Specifications

General

Displacement	49.5 cc
Fuel System	Carburetor
Ignition	CDI
Front Suspension	Telescopic Fork
Front Brake	Disc
Rear Brake	Drum
Front Tire	120/70-12
Rear Tire	130/70-12
Cooling System	Air
Transmission	CVT Automatic
Seat Height	780 mm
Wheelbase	1, 280 mm