What to do if my KYMCO Wheelchair motor is not operational?
If your KYMCO Wheelchair motor isn't working, first ensure the power is switched on. If the power is on, check if the battery is adequately charged and charge it if necessary. Also, make sure that the charger and '24V output cable' are disconnected before attempting to power on the wheelchair again after charging.
Pre-operation checks and general rules for safe driving.
Operational procedures and safety measures during actual use.
Information on maximum weight capacity and safe loading practices.
Details on using the joystick for movement, the horn, and the brake system.
Step-by-step instructions for connecting and performing the battery charging process.
General| Charging Time | 6-8 hours |
|---|---|
| Max Speed | 6 km/h |
| Battery Capacity | 12Ah |
| Max Load Capacity | 100 kg |
| Wheel Size | Front: 8" |
| Climbing Angle | 8 degrees |
To Next Page
