Kyocera ECOSYS M6635cidn - PIN Code Authorization

9-31
User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration
PIN Code Authorization
1
Display the screen.
1 [System Menu/Counter] key > [User Login/Job Accounting]
2 [User Login Setting] > [PIN Login]
2
Configure the settings.
1 Select [Off] or [On].
2 Select [OK].
NOTE
When using PIN Code Authorization, the network authentication must be enabled and [Ext.] must be selected for
server type.
Enabling User Login Administration (page 9-3)
NOTE
If the login user name entry screen appears during operations, enter a login user name
and password, and select [Login]. For this, you need to login with administrator
privileges.
The factory default login user name and login password are set as shown below.
ECOSYS M6230cidn ECOSYS M6235cidn
ECOSYS M6630cidn ECOSYS M6635cidn
Login User Name: 3000 3500
Login Password: 3000 3500