MODEL
KC65T
KC65T
HIGH EFFICIENCY MULTICRYSTAL
PHOTOVOLTAIC MODULE
Current-Voltage characteristics of Photovoltaic
Module KC65T at various cell temperatures
Current-Voltage characteristics of Photovoltaic
Module KC65T at various irradiance levels
ELECTRICAL CHARACTERISTICS
Kyocera
,
s advanced cell processing technology
and automated production facilities produce a highly efficient
multicrystal photovoltaic modules.
The conversion efficiency of the Kyocera solar cell is over 16%.
These cells are encapsulated between a tempered glass cover
and a pottant with back sheet to provide efficient protection from the severest environmental conditions.
The entire laminate is installed in an anodized aluminum frame to provide structural strength and ease of installation.
HIGHLIGHTS OF
KYOCERA PHOTOVOLTAIC MODULES
●
MODULE : UL 1703 certified
Hazardous Locations Class1, Div 2, Groups A, B, C and D
●
FACTORY : ISO9001 and ISO 14001
QUALIFICATIONS
●
Pumping systems for irrigation, rural water supplies
and livestock watering
●
Aviation obstruction lights
●
Cathodic protection systems
●
Desalination systems
●
Recreational vehicles
●
Railroad signals
●
Sailboat charging systems
●
etc.
●
Microwave / Radio repeater stations
●
Electrification of villages in remote areas
●
Medical facilities in rural areas
●
Power source for summer vacation homes
●
Emergency communication systems
●
Water quality and environmental data monitoring systems
●
Navigation lighthouses, and ocean buoys
APPLICATIONS
※1 year limited warranty on material and workmanship
※
20 years limited warranty on power output: For detail, please refer to "category IV" in Warranty issued by Kyocera
(Long term output warranty shall warrant if PV Module(s) exhibits power output of less than 90% of the original minimum rated power specified at the time of sale within
10 years and less than 80% within 20 years after the date of sale to the Customer. The power output values shall be those measured under Kyocera
,
s standard
measurement conditions. Regarding the warranty conditions in detail, please refer to Warranty issued by Kyocera)
LIMITED WARRANTY
Kyocera multicrystal photovoltaic modules have passed the following tests.
●
Thermal cycling test
●
Thermal shock test
●
Thermal / Freezing and high humidity cycling test
●
Electrical isolation test
●
Hail impact test
●
Mechanical, wind and twist loading test
●
Salt mist test
●
Light and water-exposure test
●
Field exposure test
QUALITY ASSURANCE
IRRADIANCE: AM1.5, 1kW / m
2
Voltage (V)
Current (A)
0
0
5
2
1
10 20 30
3
4
75
。
C
25
。
C
50
。
C
CELL TEMP. 25
。
C
Voltage (V)
Current (A)
0
0
4
10 20 30
2
3
1
1000W/ m
2
800W/ m
2
600W/ m
2
400W/ m
2
200W/ m
2
To Next Page
Need help?
General
