Kyosho Mini-Z User Manual

Explains Double Wishbone Suspension (DWS), wheelbase adjustments, and available tuning parts for enhanced performance.

Details the different set configurations available: CTS (Chassis/Transmitter), CS (Chassis), and BCS (Body/Chassis).

Provides advice for new users, age restrictions, and warnings about keeping the model away from children.

Safety guidelines for battery polarity, tool usage, antenna handling, and proper storage conditions.

Instructions on powering off the model, removing the body, handling moving gears, and safe operating locations.

Safety regarding motor/battery heat, cleaning methods, and the importance of using genuine parts.

Explains circuit breaker function, auto-reset, heat warnings, and how to address repeated tripping.

Addresses issues with drive train resistance and provides guidance on adjusting the gear ratio.

Lists included accessories and details the different chassis set types (CTS, CS, BCS).

Identifies various components like gear sets, tools, suspension parts, and bumpers.

Specifies the types of transmitters and batteries required for operation.

Lists necessary tools like screwdrivers and cutters, and battery specifications.

Identifies transmitter controls like antenna, steering wheel, throttle, and trim adjustments.

Identifies key chassis components such as tires, connectors, battery holder, motor, and power switch.

Provides step-by-step instructions for assembling the chassis and mounting the car body.

Instructions for installing the front body mount and adjusting the wheelbase for body compatibility.

Instructions for mounting wheels, tires, and the rear bumper.

Steps for loading transmitter batteries and mounting the car body onto the chassis.

Detailed instructions on how to insert the battery box into the transmitter.

Instructions for powering on the transmitter and an overview of the pairing process.

Detailed steps for pairing the transmitter and identifying necessary components.

Steps for completing pairing and understanding the meaning of the LED indicator status.

Common issues that cause pairing failure and their solutions, such as interference.

Correct antenna position and the sequence for powering on the transmitter first.

Instructions on how to bring the car to a complete stop and check control responses.

Explains the basic operation of the steering wheel and throttle trigger.

Inverts the throttle trigger response for reverse operation.

Adjusts the neutral position of the throttle trigger for proper car operation.

Uses steering trim to adjust the car for straight-line travel.

Allows adjustment of the steering angle to suit driver preference.

Provides separate procedures for adjusting the left and right steering angles.

Details when and how to replace batteries in both the transmitter and the chassis.

Explains the correct order for turning off power and warns about hot components.

Defines drift driving as a sliding technique for cornering and explains its difference from normal driving.

Lists required drift tires, gyro unit, and specific warnings about motor load and heat.

Instructions for setting up a circular driving course and practicing drifts around an object.

Tips on adjusting throttle for stability and steering for counter-steer and drift control.

Instructions for installing drift tires and recommendations for suitable driving surfaces.

Guidance on driving straight and learning the feel of drift control.

Setting up for figure 8 driving and transitioning into drifts using a feint technique.

Controlling throttle during turns to maintain a consistent distance from the turn center.

Explains TikiTiki Mode, including its speed limiter and overtake function.

Provides the steps required to bind the transmitter to the chassis.

Details transmitter requirements and how to control the overtake function.

Instructions for setting transmitter channels and assigning keys for the overtake function.

Information on downloading and using the TikiTiki Mode Manager software for settings.

How to adjust the throttle range and brake power.

Instructions for adjusting the strength of the brake.

Steps to set up the transmitter and chassis for training mode.

Procedure for exiting training mode and resetting transmitter settings to default.

Instructions for reversing steering direction and returning to the normal setting.

Inverts throttle response and provides steps to revert to the original setting.

Tips on holding the transmitter and practicing gentle controls for better handling.

Adjusting steering angle, throttle, and practicing drifts for advanced control.

Instructions for installing tires, wheels, and the rear bumper.

Steps for installing the tie-rod holder and the tie-rod.

Instructions for disassembling the front suspension and adjusting the suspension limiter.

Instructions for installing optional ball bearings and the spur gear.

Replacing the rear suspension holder and adjusting the toe angle.

Adjusting the rear camber angle and its effects on grip and posture.

Adjusting the rear down stop and its impact on grip and steering.

Installing spring spacers to adjust chassis height and roll/pitching.

Steps for removing, installing the motor, and handling the pinion gear.

Table of gear ratios and recommendations for optional parts when changing gears.

Details wheelbase options (M, L, LL) and rear chassis rearrangement.

Instructions on how to replace the spur gear according to the wheelbase used.

Steps for rearranging the rear chassis when changing to LL size wheelbase.

Detailed steps involving screw assembly for chassis construction.

Explains the function of the Gyro Unit for stability and the I.C.S. connector for programming.

Detailed step-by-step guide for installing the gyro unit onto the chassis.

Explains the I.C.S. system, its communication standard, and how to connect to a PC.

A visual exploded view illustrating all the parts of the model.

A comprehensive list of spare parts with their numbers, descriptions, and prices.

Addresses issues where the model does not move or loses control, providing causes and solutions.

Troubleshoots issues like not running straight, not stopping, and slow speed.

German troubleshooting for model movement and steering issues.

German troubleshooting for driving behavior, stopping, speed, and chassis noises.

French troubleshooting for model movement and control loss issues.

French troubleshooting for steering, stopping, speed, and chassis noise issues.

Spanish troubleshooting for model movement and control loss issues.

Spanish troubleshooting for steering, stopping, speed, and chassis noise issues.

Information on purchasing spare parts locally or through mail order.

Details contact methods like phone and fax, and provides an inquiry form.