To Next PageTo Next Page
Need help?Do you have a question about the Kyosho MAD FORCE and is the answer not in the manual?
General| Scale | 1/8 |
|---|---|
| Drive System | 4WD |
| Width | 415 mm |
| Wheelbase | 360 mm |
| Ground Clearance | 60mm |
| Chassis Material | Aluminum |
| Engine | KE25 |
| Suspension | Double Wishbone |
| Tire Type | Knobby |
Important safety warnings and advice before starting assembly and operation.
Specifies the need for a 2-channel 2-servo radio control set for operation.
Lists required fuel and starting equipment for the engine.
Details paints and brushes necessary for model body painting.
Lists essential tools and equipment required for the assembly process.
Step-by-step guide for setting up and preparing the radio control system before use.
Important preliminary checks and guidelines before starting assembly.
Further pre-assembly checks, including screw and hardware identification.
Diagram showing the layout of plastic parts on runners, Part 1.
Diagram showing the layout of plastic parts on runners, Part 2.
Instructions for assembling the gear differentials.
Step-by-step guide for assembling the front axle.
Assembly instructions for the front suspension arm.
Detailed steps for assembling the rear axle.
Instructions for assembling the rear suspension arm.
Assembly guide for the 3-speed transmission unit.
Instructions for installing and preparing the engine.
Assembly guide for the shock absorbers.
Instructions for assembling the servo saver mechanism.
Step-by-step guide for assembling the gearbox.
Assembly instructions for the brake system.
Instructions for attaching the side plates to the chassis.
Guide for installing the steering servo and horn.
Instructions for mounting the fuel tank.
Guide for installing the throttle servo.
Instructions for installing the radio receiver and connecting components.
Assembly instructions for the front bumper and wheelie bar.
Detailed steps for engine and roll bar installation onto the chassis.
Guide for installing the exhaust muffler and fitting the fuel tube.
Assembly and adjustment of throttle and brake linkages.
Instructions for installing the air cleaner and front suspension.
Assembly of steering system components and linkage.
Assembly of front suspension components and shock absorbers.
Assembly of rear suspension components.
Assembly of rear suspension components and shock absorbers.
Instructions for assembling and preparing the wheels and tires.
Preparing the body shell and detailed guide for painting.
Instructions for applying decals and using body pins.
Instructions for installing an optional O.S. .21 RG-X engine.
Guide for installing optional double shock absorbers.
Detailed procedure for adjusting the 3-speed transmission shift timing.
Maintenance procedures for the 3-speed transmission.
Critical warnings about where and when not to operate the model to prevent accidents.
Essential safety precautions to prevent accidents and injuries during operation.
Exploded view of the front and rear gear differentials.
Exploded view of the shock absorber assembly.
List of available spare parts with part numbers and quantities.
List of optional parts for customization and enhancement.
Detailed catalog of screws, nuts, and other small hardware.
