Kyosho ULTIMA RB5 User Manual

Details parts and steps for assembling the initial front suspension components and arm.

Guides the assembly of the front suspension mount, including bearings and collars.

Details the assembly of the servo saver, specifying ball stud and bearing installation.

Completes the servo saver assembly with nuts, washers, and screws.

Attaches the front suspension to the chassis, noting plastic flashing removal.

Details the assembly of front suspension steering tie rods, noting part orientation.

Guides the assembly of front upper rods, noting direction, length, and reverse screws.

Connects the final front suspension steering tie rods and upper rods.

Installs the front shock stay using screws and nuts.

Explains how to adjust the differential gear for proper operation and prevent damage.

Details the assembly of front and rear shock absorbers, including oiling.

Covers shock absorber spring tension adjustment and oil filling.

Installs the steering servo, connecting it to the steering linkage and noting servo types.

Mounts the motor, ensuring proper gear meshing with a small gap.

Attaches the prepared body shell to the chassis, including setting camber angles.

Lists places and situations where operating the model is prohibited due to safety risks.

Provides crucial warnings about rotating parts, hot components, and battery handling.

Addresses issues like servo not operating or motor not running, with causes and solutions.

Covers problems with car movement, speed, wheel rotation, and throttle response.