KYOWA KW-4765 - User Manual

KYOWA SERVICE CENTER (MAIN)
RM. 1203, STATE CENTER BLDG, #333 JUAN LUNA ST, BINONDO MANILA
TEL: 242-1731 - 35
METRO MANILA
TRONIX QUEZON CITY (MAIN) #777 N.S. AMORANTO ST, COR. STO. DOMINGO AVE, Q.C.
TEL: 743-9094 / 749-8477 MOBILE: 0922-8534797/0917-5231489 CONTACT PERSON: MS. JENIELYN MANZANO
TRONIX MANILA #1793 CONCEPCION AGUILA ST, NEAR J.P. LAUREL ST, SAN MIGUEL, MANILA (NEAR
MALACAÑANG)
TEL: 743-4088 MOBILE: 0922-7909555 CONTACT PERSON: MS. ANALEN FIADACAN
TRONIX STA. CRUZ #910 LUZON ST. (BET. MASANGKAY & BENAVIDEZ ST.) STA. CRUZ, MANILA
TEL: 542-8345 / 310-3553 MOBILE: 0922-2389971 CONTACT PERSON: MS. SHEILA PIRANTE
TRONIX SAN JUAN #135 N.DOMINGO ST, CORNER PINAGLABANAN, BRGY. BALONG BATO, SAN JUAN CITY
TEL: 949-3608 / 984-6395 MOBILE: 0922-9218653 CONTACT PERSON: MS. MICHELLE CASAÑA
TRONIX ALABANG TOWN CENTER LA-7 SERVICE TOWN, ALABANG TOWN CENTER, MUNTINLUPA CITY
TEL: 807-3546 / 624-6880 MOBILE: 0922-7584917 / 0917-5899059 CONTACT PERSON: MR. FRANCIS ACOSTA
TRONIX PARAÑAQUE #103 CMSR BLDG, PHASE 1, 88 PRESIDENT AVENUE, BF HOME, PARAÑAQUE
TEL: 622-4540 / 861-0092 / 828-2915 MOBILE: 0917-5978342 / 0932-4060806 CONTACT PERSON: MS. ELIZABETH
PALIMA
TRONIX MAKATI #103 MJM BLDG, 650 JP RIZAL ST, BRGY. VALENZUELA MAKATI CITY
TEL: 710-1980 / 949-3684 MOBILE: 0932-1999085
TRONIX MARIKINA #572 J.P. RIZAL AVE, CONCEPCION 1, MARIKINA (IN FRONT OF KSERVICO)
TEL: 696-6411 MOBILE: 0942-0940088
TRONIX PASIG LOWER GROUND SERVICE LANE, SM CENTER, PASIG
TEL: 703-5599 / 234-9020 MOBILE: 0932-1999372 CONTACT PERSON: MS. NORA CRESENCIO
TRONIX SHAW - MANDALUYONG #412 SHAW BLVD, COR. TORRES & CALDERON ST, MANDALUYONG CITY
TEL: 542-8360 / 725-7290 MOBILE: 0923-1646350 CONTACT PERSON: MS. SHERLY DELA CRUZ
TRONIX COMMONWEALTH LAGMANLAG COMMONWEALTH AVE, HOLY SPIRIT, DILIMAN, Q.C. (BESIDE SHELL)
TEL: 623-7266 MOBILE: 0933-6584465 / 09175810546 CONTACT PERSON: MR. MANNY SAGAYAP
CAVITE
TRONIX CAVITE KM 16, AGUINALDO HI-WAY, NIOG 1-A, PANAPAAN 1, BACOOR, CAVITE
TEL: (046) 519-0755 / (046) 475-6362 MOBILE: 0932-1991811 CONTACT PERSON: MS. MEANN DIONISIO
CEBU
MARKWELL ENTERPRISES #85 SIKATUNA ST, CEBU CITY
TEL: (032) 253-0752 MOBILE: 0917-6256934 CONTACT PERSON: MR. BOY SOUICO
BIO PLUS ELEC. REPAIR CENTER C. PADILLA ST, SAN ROQUE, MAMBALING, CEBU CITY
TEL: (032) 262-1339 MOBILE: 0922-4744991 CONTACT PERSON: MS. ZYSELDA MABUTE
DAVAO
KOOL EXPRESS DOOR 5, LUA BLDG, QUIRINO AVE, DAVAO CITY
TEL: (082) 227-6369 MOBILE: 0908-420-6303 CONTACT PERSON: MS. DORIS ASIRIT
ILOILO
NACES APPLIANCE CORPORATION NACES BLDG, #10 DELGADO ST, ILOILO
TEL: (033) 337-7696 MOBILE: (033) 508-2205 CONTACT PERSON: MS. LORELIE LIM
TARLAC
TARLAC MAC ENTERPRISES INC. BLK. 9, MCARTHUR HIGHWAY, SAN NICOLAS, TARLAC
TEL: (045) 982-3178 MOBILE: 0922-8597136
PROFESSIONAL BLENDER
MODEL NO.: KW-4765
Voltage: 230V a.c. 60Hz Power: 1500 WATTS
INSTRUCTION MANUAL

Summary

Product Overview and Safety

Parts Description

Identifies and illustrates the various components of the Kyowa Blender model KW-4765.

Important Safeguards

Provides essential safety precautions to follow when operating the Kyowa Blender to prevent accidents.

Operating and Maintenance Procedures

How to Use

Step-by-step instructions for assembling, operating, and using the Kyowa Blender for various tasks.

Clean and Care

Guidelines for cleaning and maintaining the blender's parts and motor housing to ensure longevity.

Service Information

Instructions on handling malfunctions, repairs, and authorized service facilities for the Kyowa Blender.

Overview

1. Function Description
2. Important Technical Specifications
3. Usage Features
4. Maintenance Features

This document describes the Kyowa Professional Blender, model KW-4765, an appliance designed for blending various food items.

Function Description:

The Kyowa Professional Blender is a kitchen appliance primarily used for blending, mixing, and crushing food. It features a motor base, a pitcher with a blade assembly, a pitcher cover, a refill cap, and a stirrer. The blender is designed to process both soft and hard foods, including ice, to achieve a well-blended consistency. It incorporates safety features such as a mechanism that prevents operation if the pitcher is not securely fixed to the motor base, and an automatic shut-off in case of overload.

Important Technical Specifications:

• Model Number: KW-4765
• Voltage: 230V a.c.
• Frequency: 60Hz
• Power: 1500 WATTS
• Controls: Power switch, Rotary Speed Control (levels 1 to 5), Pulse Control.
• Safety Features: Overload protection with a reset button located at the bottom of the motor base, safety device requiring secure pitcher attachment for operation.
• Components: Refill cap, pitcher cover, pitcher, blade assembly, power switch, rotary speed control, pulse control, stirrer, rubber footing.

Usage Features:

1. Initial Setup: Before first use, all packaging materials must be removed, and the power cable untangled. The blender pitcher must be securely placed on the motor base; the unit will not operate otherwise due to a safety device.
2. Food Preparation: Food items should be washed and cut into small pieces, not larger than 1 inch, before being placed inside the blender pitcher.
3. Operation:
   • Ensure the power switch is OFF and the speed control knob is at the lowest setting before plugging the unit into a power supply.
   • Cover the pitcher with the pitcher cover and insert the refill cap.
   • Turn the power switch to ON to start operation.
   • Support the unit by resting a hand on the container lid during operation.
   • Adjust the blending speed by turning the speed adjustment control knob clockwise from level 1 to 5. It is recommended to start with the lowest setting and increase if processing takes too long.
   • For adding ingredients during blending, remove the refill cap and gradually add items through the small opening in the cover.
   • The stirrer can be inserted into the blender pitcher (after removing the refill cap) to mix ingredients or assist in crushing ice.
   • The pulse function is specifically for crushing ice or processing hard foods.
   • The blender should run for approximately 1 minute, then be turned OFF for a 1-minute rest period. This process should be repeated until the desired blending consistency is achieved.
4. Overload Protection: The blender will automatically shut off if overloaded. To restart, press the reset button located at the bottom of the motor base.
5. Safety Precautions:
   • Always operate from a power source matching the rating label.
   • Place the unit on a flat, even surface, away from counter edges.
   • Avoid using the blender in damp or wet areas; keep the exterior and base dry.
   • Do not operate if any part is damaged; return to an authorized service facility.
   • Keep away from hot surfaces (gas/electric burners, hotplates, ovens).
   • Use only originally provided accessories.
   • Ensure the pitcher is firmly attached and the cover is tightly closed during operation.
   • Do not overload the blender by exceeding the MAX line.
   • Never leave the blender unattended.
   • Wait for the blender to stop completely before removing the container.
   • Switch OFF and unplug before emptying, when not in use, or before cleaning.
   • Unplug by holding the plug, not by pulling the cord.
   • Do not immerse the blender in water or expose it to rain/moisture to prevent electric shock.
   • Keep out of reach of children or individuals with mental/physical disabilities.

Maintenance Features:

1. Cleaning Movable Parts: After each use, the pitcher, lid, and refill cap should be washed with warm, soapy water. These parts are also dishwasher safe.
2. Cleaning the Pitcher (In-situ): The blender pitcher can be cleaned by adding water and a few drops of liquid detergent, placing it on the motor base, and operating for about 10 seconds. Discard the liquid and rinse thoroughly.
3. Cleaning the Motor Base: The motor housing should never be immersed in water. It should be cleaned by wiping with a soft, damp cloth.
4. Avoid Abrasives: Do not use abrasive cleaning agents or metallic/sharp objects (e.g., scrubbing brushes, knives) for cleaning any part of the blender.
5. Drying and Storage: All parts should be wiped dry with a soft, dry cloth. Store the blender in a cool and dry place.
6. Reassembly: Ensure all parts and accessories are put back in their proper places before subsequent operation.
7. Service and Repair:
   • If the blender malfunctions or appears damaged, it should be brought to the place of purchase or an authorized Kyowa dealer for inspection, repair, or replacement.
   • The user should not attempt to disassemble the blender, as there are no user-serviceable parts inside. All repairs must be referred to an authorized Kyowa service facility.

The document also provides a list of Kyowa Service Centers across various locations in the Philippines, including Metro Manila, Cavite, Cebu, Davao, Iloilo, and Tarlac, with contact details for each.

KYOWA KW-4765 Specifications

General

Brand	KYOWA
Model	KW-4765
Category	Blender
Language	English