KYOWA WDS-180A User Manual

IM-A-682D March 2016
COMPACT
DIGITAL INDICATOR
WDS-180A
INSTRUCTION MANUAL
Thank you for purchasing KYOWA’s product WDS-180A (Compact
Digital Indicator).
Read this Instruction Manual carefully in order to make full use of the
high performance capabilities of the product.
Do not use the product in methods other than described in this
Manual.
Copyright © KYOWA ELECTRONIC INSTRUMENTS CO., LTD. All rights reserved.
This Instruction Manual may not be copied or reproduced, in whole or part, without consent of
KYOWA.
The contents of the Instruction Manual are subjected to change without prior notice.

KYOWA WDS-180A Specifications

General

Brand	KYOWA
Model	WDS-180A
Category	Measuring Instruments
Language	English

Summary

Safety Precautions

Safety Symbols

Warning Guidelines

Critical safety warnings regarding installation, environment, and operation of the WDS-180A.

Cautionary Notes

Cautions regarding wiring, vibration, environment, and battery status of the WDS-180A.

Parts Names and Main Functions

Connection and Battery Management

Connecting the Transducer

Setting Operation and Functions

Measure Mode (MEAS)

TEDS Functionality

TEDS Data Sensitivity Registration

Loading TEDS data for automatic sensitivity calibration and physical quantity calculation.

Calibration File Sensitivity Registration

Using saved calibration files to register sensitivity based on transducer data.

Setting TEDS Loading Operations (F-7)

Creating Calibration File

Registering File (F-11)

Function Selecting Mode Setting List

Load Calibration (F-2)

Calibrates the transducer using the actual load applied.

Sensitivity Calibration (F-3)

Setting TEDS Loading Operation (F-7)

Selecting TEDS Function (F-10)

Operating Calibration File (F-11)

Error Code Table

IdEr: TEDS Communication Error

Error when TEDS sensor communication fails.

noEr: Serial Number Not Found

Error when the specified serial number does not exist.

oL: Input Range Exceeded

Error when the indicating value exceeds the input range.

Ad: Sensor Cables Not Connected

Error indicating that sensor cables are disconnected.

Err: Calibration Constants Incorrect

Error due to incorrect calibration constants or sensitivity values.

Er00: Data Load or Data Error

Error during data file loading or if data is incorrect.

Er01: EEPROM Write Error (Saving)

Error writing to EEPROM during data file saving.

Er04: EEPROM Write Error (Overwrite)

Error writing to EEPROM while overwriting data files.

Er06: EEPROM Write Error (Clearing)

Error writing to EEPROM while clearing data files.

EP0-EP7: EEPROM Area Failure

Indicates a failure in the EEPROM area.