Need help?Do you have a question about the L-Acoustics KARA and is the answer not in the manual?
General| Frequency Response | 55 Hz - 20 kHz |
|---|---|
| Nominal Impedance | 8 ohms |
| Impedance | 8 Ohms |
| Components | 1 × 3" HF driver |
| Max SPL | 140 dB |
| Enclosure Material | Birch plywood with protective coating |
| Connectors | 2 x NL4 |
General safety instructions, warnings, and precautions for system use and deployment.
Overview of the Kara modular line source system, its features, and operating modes.
Lists loudspeaker enclosures (Kara, SB18, etc.) and powering/driving systems (LA4X, LA8, etc.).
Details the four-point rigging system of the Kara enclosure and inter-enclosure angles.
Describes key rigging elements like M-BUMP, M-BAR, M-JACK, KARA-ANGARMEX, KARA-MINIBU, KARA-PULLBACK.
Outlines mechanical safety limits and considerations for flown and stacked arrays.
Step-by-step guide for flying Kara and SB18/Kara arrays with M-BUMP.
Step-by-step guide for stacking Kara arrays using M-BUMP.
Details controller drive capacity and provides cabling schemes for connecting enclosures.
Provides procedures for disassembling and reassembling Kara and SB18 components.
Lists technical specifications for Kara loudspeaker and SB18 subwoofer.
Details rigging options and site angle adjustments for flown arrays.
Details M-BUMP and KARA-MINIBU platform configurations for stacking arrays.
Illustrates the procedures for removing and inserting safety pins on shackles.
Provides recommendations on speaker cable gauge and maximum length.
To Next Page
