Need help?Do you have a question about the L-Acoustics LA12X and is the answer not in the manual?
General| Power Output | 12000 W |
|---|---|
| Amplifier Technology | Class D |
| Output Channels | 4 |
| Input Impedance | 20 kΩ |
| Mains Voltage | 100-240 V |
| Power Consumption | 2400 W |
| DSP | Yes |
| AVB | Yes |
| AES/EBU | Yes |
| Cooling | Forced air |
| Protection | Over-temperature, over-current, short-circuit |
Official owner's manual for the Kara loudspeaker system.
Essential guidelines for safe use, inspection, and maintenance of the system.
Precautions regarding unsecured items and the effects of wind on rigging.
Describes the integrated four-point rigging system for Kara enclosures.
Introduces the M-BUMP, M-BAR, M-JACK, KARA-ANGARMEX, and other rigging components.
Specifies maximum enclosure limits for flown arrays based on rigging accessories.
Outlines safe limits for stacked arrays, including platform and ground stacking.
Guidance on using Soundvision for mechanical safety assessment and warnings.
Outlines the steps for regular inspection and preventive maintenance of the system.
Provides a procedure for inspecting rigging parts for wear, damage, and proper function.
Step-by-step guide for flying a Kara array using the M-BUMP rigging structure.
Procedures for safely disassembling flown Kara arrays from M-BUMP structures.
Instructions for stacking Kara arrays on M-BUMP platforms with M-BAR/M-JACK.
Table showing the number of enclosures that can be driven per controller output.
Step-by-step guide for disassembling and reassembling Kara loudspeaker components.
Details maintenance procedures for rigging components like M-BUMP and M-BAR.
Comprehensive technical data for the Kara loudspeaker enclosure.
To Next Page
