l'eau miracle water MW-30 User Manual

Model MW-30
How to maintain and operate
your Demand Controlled
Water Softener
If you have questions or concerns when
installing, operating or maintaining your
softener, visit www.leaumiraclewater.ca
or call our toll free number:
1-800-356-7851
System tested and certified by the Water Quality
Association against CSA B483.1.
DO NOT RETURN TO STORE
Installation and Operation Manual
7337539 (Rev. A 1/2/13)
System tested and certified by NSF International
against NSF/ANSI Standard 44
for hardness reduction and efficiency,
and certified to NSF/ANSI Standard 372.

l'eau miracle water MW-30 Specifications

General

Brand	l'eau miracle water
Model	MW-30
Category	Water Dispenser
Language	English

Summary

Unpacking and Inspection

Customer Support and Contact

Provides contact details for questions, missing parts, or damage, and store return policy.

Safety Guidelines and Water Conditioning

General Safety Guidelines

Important safety precautions for installation, handling, electrical, and water requirements.

Installation Planning

Plumbing Connection Options

Selecting the Installation Location

Key Location Considerations

Initial Installation Steps

Step 1: Turn Off Water Supply

Instructions to shut off the main water supply and drain all house pipes.

Drainage and Leak Testing Procedures

Install Valve Drain Hose

Pressure Testing for Leaks

Procedure to test for leaks by slowly filling the system with water and opening faucets.

Controller Programming and Sanitization

Sanitize the Water Softener

Faceplate Timer Programming

Set Current Time of Day

Guides the user to correctly set the current time on the softener's digital display.

Controller Configuration

Set Water Hardness Level

Inputting water supply hardness (gpg), with adjustments for iron content.

Set Regeneration Start Time

Selecting the preferred time of day for the softener to initiate its regeneration cycle.

Customizing Softener Operations

Manual Recharge Options

Routine Maintenance Procedures

Refilling the Salt Storage Tank

Cleaning Internal Components

Clean Nozzle and Venturi Assembly

Protection Against Freezing

Softener Draining Procedure

Steps to completely drain the softener to prevent damage from freezing temperatures.

Troubleshooting Common Issues

Problem Resolution Table

Lists common problems like 'No Soft Water' and provides solutions and repair kits.

Error Code Diagnostics

Guidance for identifying and resolving specific error codes (E1-E5) displayed on the unit.

System Diagnostics and Checks

Automatic Electronic Diagnostics

Explains the unit's self-diagnostic function and how error codes are displayed.

Manual Diagnostic Procedures

Steps to manually advance cycles and check component operation for troubleshooting.

Controller Reset and Model Information

Resetting to Factory Defaults

Steps to restore all electronic controller settings to their original factory defaults.

Manual Regeneration Cycle Test

Verify Regeneration Process Steps

Checks valve motor, brine fill, brine draw, and rinse operations for proper function.

Warranty and Legal Information

Residential Warranty Details

Details warranty periods for tanks and parts, and general provisions.

Warranty Limitations and Consumer Rights