Need help?Do you have a question about the L-K Industries Benchmark C and is the answer not in the manual?
General| Brand | L-K Industries |
|---|---|
| Model | Benchmark C |
| Category | Laboratory Equipment |
| Language | English |
Outlines the terms and conditions for product defects and repairs.
Provides contact details including main line, tech helpline, fax, email, address, and website.
Covers the centrifuge's intended use, assembly, features, and essential safety guidelines for operation.
Details electrical input, maximum temperature, and current protection ratings.
Specifies conditions for use, including indoor-only, altitude, and humidity limits.
Lists various ASTM and API standards the centrifuge is designed to meet.
Enumerate safety certifications and standards such as UL, CSA, and ISA.
Guides on securing the centrifuge to a benchtop and ensuring proper working clearance.
Lists critical safety warnings regarding solvent exposure, explosion hazards, and unbalanced tubes.
Illustrates wiring diagrams for 120VAC and 240VAC models, emphasizing hard-wiring and circuit breakers.
Details powering the unit, inserting samples, and initiating motor operation.
Explains how to preheat the unit and set the operating temperature for optimal performance.
Provides step-by-step instructions for adjusting the temperature controller settings.
Describes the safety mechanism that shuts off heaters if the bowl temperature exceeds limits.
Explains how to use the countdown timer for timed centrifuge runs.
Covers starting, stopping, speed adjustment, and emergency shutdown procedures for the motor.
Details the use of the emergency motor off switch and subsequent reset procedures.
Advises caution during sample loading/unloading and using the emergency switch.
Information on purchasing parts and utilizing the in-house repair service.
Guidelines for cleaning the unit, inspecting parts, and replacing cushions after tube breakage.
Explains the purpose of fuses and how to replace them safely.
Lists common problems like vibration, broken tubes, and screen malfunctions.
Addresses problems with the motor not running, stalling, or not reaching speed.
Troubleshoots issues with temperature display drops and thermal switch trips.
Identifies potential failures in the lid/door locking mechanism and their causes.
Provides a table for converting Revolutions Per Minute (RPM) to Relative Centrifugal Force (RCF).
Lists available programming diagrams for temperature, RPM, and timer settings.
To Next Page