1 of 3
ALL WEATHER ADIRONDACK CHAIR
Thank you for purchasing our All Weather Adirondack Chair.
Assembly of this product requires a 4mm hex key which is
included, and a 7/16” wrench.
We have found it helpful to have a second person present in at
least one step of the assembly
STEP 1
Read through these instructions thoroughly before beginning
assembly. We have found this to be of great value when first
assembling this product.
STEP 2
Remove all parts and hardware from packing material. Pieces
should be placed on a non abrasive surface (like the carton or
carpet) to prevent damage to the finish.
STEP 3
Identify all parts using assembly instructions on next page
STEP 4
Identify and count hardware using assembly instructions on next
page.
Need help?
General
To Next Page
