Need help?Do you have a question about the L2 Audio PD1023 and is the answer not in the manual?
General| Brand | L2 Audio |
|---|---|
| Model | PD1023 |
| Category | Music Mixer |
| Language | English |
Description of the balanced low impedance microphone input, supporting standard XLR connections.
Activates phantom power for condenser microphones or DI boxes requiring 48v. Two switches for inputs 1-3 and 4-6.
Balanced line level or unbalanced jack input for instruments. DI box may be needed for guitars.
Filters frequencies below 75Hz on channels 1-6 to prevent low rumble feedback.
Sets the input signal level for microphones, with a range of 10-60dB.
LED lights up when the signal peaks. Should not stay on to avoid clipping.
Adjusts high or treble frequencies. The 12 o'clock position is the flat setting.
Fine-tunes the mid-frequency range in conjunction with the Mid frequency pot.
Adjusts mid-range frequencies, similar to the High EQ control.
Adjusts low (bass) frequencies, similar to the Mid and High EQ controls.
Controls the signal level sent to the Aux channel for monitors or foldback feeds.
Controls the amount of built-in vocal effect routed to the channel.
Adjusts the stereo position of the signal between left and right outputs.
Isolates the channel from the mix, useful when a channel is not in use.
Enables listening to an isolated channel via headphones before the fader.
Adjusts the mix level of the individual channel to the main output.
¼" jack inputs for stereo sources like keyboards or playback devices.
Reduces the gain by 10dB for line level feeds into stereo channels.
Sets the input signal level for microphones on stereo channels, range 10-60dB.
Connect music sources or record the main mix to external devices.
Used for returning external effects units or as additional line inputs.
Selects one of 16 preset digital effects using a rotary pot.
Adjusts the amount of effects sent to the output mix.
Sets different amounts of effects for the main mix and auxiliary send.
Controls the signal level returning into the send and return loop.
Controls playback level from sources like CD or MP3 players.
Controls the signal level for headphone monitoring.
Allows cutting or boosting specific frequencies to enhance the mix or prevent feedback.
Control the main mix level to the left and right outputs.
Provides a mono signal output, potentially for a powered sub.
Controls the overall output level of the auxiliary mix.
Connects to monitor inputs or sends signals to external effects processors.
Sends signal to aux2/efx or controls internal effects with a foot switch.
Outputs for connecting the mixer to external power amplifiers.
Enables listening to isolated channels (PFL) or the main mix via headphones.
Connects to an external power source like a sub bass bin.
3-stage LED indicators showing main output levels in decibels (dB).
Enables bridging of internal amplifiers for a mono sum output.
States that L2 Audio products are exclusively distributed by MGD Group Ltd.
Provides a one-year warranty from the date of purchase for defects in material or workmanship.
Requires product registration online within 14 days of purchase to validate warranty.
Details the process for returning products for warranty service, including initial contact.
Emphasizes retaining original packaging to prevent transit damage and potential warranty invalidation.
Lists exclusions like misuse, modifications, accidental damage, wear and tear, and transit loss.
Specifies that mains leads and batteries are not covered under this warranty.
Confirms that statutory rights are not affected by the warranty terms.
To Next Page