L3 Aviation Products Lynx NGT-9000+ User Manual

Aviation Products
NGT-9000
NGT-9000+
NGT-9000D
Pilot’s Guide for Models
NGT-9000R
NGT-9000R+
NGT-9000RD
APPENDIX E - Pilot's Guide
Rev.4/07-13-2016

L3 Aviation Products Lynx NGT-9000+ Specifications

General

Weight	1.5 lbs (0.68 kg)
Dimensions	6.25 x 3.25 x 1.75 inches (159 x 83 x 44 mm)
Frequency	1090 MHz
Velocity Accuracy	0.1 m/s
Operating Temperature	-20°C to +55°C
Transmitter Power	250W peak
GPS Technology	WAAS-enabled
ADS-B	Yes
Accuracy	3 meters (with SA off)
Interfaces	RS-232, ARINC 429
GPS	Yes
Input Voltage	10-32V DC
Power Supply	10-32V DC

Summary

CHAPTER 1 DESCRIPTION

INTRODUCTION

Overview of the Lynx NGT-9000 family of products and their core functions.

SPECIFICATIONS

Detailed technical specifications, including part numbers, weight, power, interfaces, and compliance.

SYSTEM CAPABILITIES

Explains ADS-B, ADS-R, TIS-B, TAS, and FIS-B services and their functionalities.

EQUIPMENT DESCRIPTION

Details required and optional equipment, including antennas, DCM, displays, and control panels.

CHAPTER 2 OPERATION

INTRODUCTION

Describes preflight procedures for panel and remote mount Lynx NGT-9000.

POWER AND INITIALIZATION

Covers applying power, startup sequences, and initial system checks for panel and remote mounts.

BASIC OPERATION

Explains touch screen interface, screen buttons, and application navigation.

TRANSPONDER OPERATION

Details transponder functions, squawk codes, mode control, and IDENT button usage.

TRAFFIC OPERATION

Covers traffic display, symbols, range, altitude modes, and data limitations.

WEATHER OPERATION

Describes FIS-B services, weather data display, map elements, and product selection.

MAINTENANCE MODE

Outlines the procedure for entering and performing screen calibration.

CHAPTER 3 CONTROLS AND INDICATORS

INTRODUCTION

Introduces controls, indicators, and interfaced devices for the Lynx NGT-9000.

COCKPIT CONTROLS AND IDENT

Explains cockpit switches, IDENT function, and indicator lamps.

SYSTEM ALERTS AND DISPLAYS

Details TAS Alert, ADS-B Out Fail lamp, and alternate display interactions.

AUDIO ANNOUNCEMENTS

Describes aural alerts, extended callouts, and audio inhibit features.

CP-2500 CONTROL PANEL

Covers operation, buttons, display, and modes of the CP-2500 control panel.

CHAPTER 4 PRINCIPLES OF TAS OPERATION

INTRODUCTION

Explains Traffic Advisory (TA) criteria and factors affecting traffic symbol display.

SENSITIVITY LEVELS

Details Sensitivity Level A and B criteria for displaying Traffic Advisories.

OPERATIONAL PARAMETERS

Covers TA symbol duration, ground filtering, and interference limiting for TAS.

CHAPTER 5 TROUBLESHOOTING

INTRODUCTION

Describes potential conditions and troubleshooting steps for the Lynx NGT-9000.

GENERAL DISPLAY CONDITIONS

Lists common indications shown on the display during normal operation.

SYSTEM STATUS MESSAGES

Explains meanings of system status messages like 'Fail', 'Degraded', and 'Coverage'.

INVALIDITIES AND RESOLUTIONS

Provides troubleshooting for invalidities, blank displays, and function issues.

APPENDIX A RECORD OF IMPORTANT INFORMATION

DEALER AND EQUIPMENT DETAILS

Section for recording dealer, equipment, and aircraft purchase and installation information.