EasyManua.ls Logo

L8star BM10 - Page 7

L8star BM10
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Camera Settings:
--Anti-flicker: You can set as 50Hz or 60Hz.
--Scene mode: You can select “Auto” or “Night”.
--White balance: You can select Auto, Daylight, Tungsten , Fluorescent , Cloudy
or Incandescent.
--Delay timer: You can selectOff, 5 sec, 10 sec , 15 sec.
--Autosave: You can select “Active” or “Deactive”.
Image Settings:
--Image size: You can select 240x240 ,160x120 or320x240”.
--Image quality: You can select Low ,Normal orGood”.
Storage: You can save it to the SIM card or memory card.
Storage;. You can Settings Maintain storage location
Prompt: Observe photographing related local laws and regulations. Do not use the
function in illegal way.
2.6.2
Image s
You can view the pictures saved in the phone memory
2.6.3
Vrecorder : This function enables you to record dynamic pictures. Adapt the VCR to
the scene or the figure, the press 5 to start or pause recording.
2.6.4
VideosThis phone supports the video format of 3pg and mp4.
Enter the video play list interface, press left soft key, you could go on the following
operations.
Play: play the video file.Navigation Button Definitions
--Play and pause press the number 5 key
--full screen: you can Open the navigation key to display the full screen
-- 4 and 6 up and down first switch\
--Volume adjustment * and #
--Repeat: you can choose repeat one, all and off.