26
The Outdoor Temperature Transmitter
•
Remote transmission of outdoor
temperature to Weather station by 868 MHz
signals
•
Shower proof casing
•
Wall mounting and table-standing
SETTING UP:
Note: This weather station receives only one outdoor transmitter.
1. First, insert the batteries into the Temperature transmitter. (see “Install
and replace batteries in the Temperature transmitter“).
2. Within 30 seconds, insert the batteries into Weather station (see “Install
and replace batteries in the Weather station”). Once the batteries are
in place, all segments of the LCD will light up briefly. Then the time (as
0:00) and the weather icon will be displayed. If these are not displayed
after 60 seconds, remove the batteries and wait for at least 30 seconds
before reinserting them.
3. After inserting the batteries, the Weather station will start receiving data
from the transmitter. The outdoor temperature and the signal reception
To Next Page
Loading...
