To Next PageTo Next Page
Need help?Do you have a question about the La Crosse Technology WS-9124TWC-IT and is the answer not in the manual?
General| Display Type | LCD |
|---|---|
| Indoor Temperature Range | 32°F to 122°F (0°C to 50°C) |
| Outdoor Temperature Range | -40°F to 140°F (-40°C to 60°C) |
| Wireless Transmission Range | 330 feet (100 meters) |
| Humidity Resolution | 1% |
| Wireless Frequency | 433 MHz |
| Outdoor Humidity Range | 1% to 99% |
| Power Source (Sensor) | 2 x AA Batteries |
| Temperature Resolution | 0.1°F |
Lists key functionalities of the main unit, including clock, temperature, humidity, and transmission.
Details the capabilities of the remote sensor, including remote transmission and water-resistant casing.
Step-by-step instructions for initial setup with a single sensor.
Instructions for setting up the device with multiple sensors.
Details how to install and replace batteries in the main temperature station unit.
Details how to install and replace batteries in the outdoor temperature sensor.
Describes the two function keys (SET/CH and MIN/MAX/+) on the main unit.
Details the different sections of the LCD screen and their indicators.
Guide for setting the time display format and temperature units (Fahrenheit/Celsius).
Step-by-step instructions for manually setting the hour and minute.
How to view the minimum recorded indoor and outdoor temperature and humidity.
How to view the maximum recorded indoor and outdoor temperature and humidity.
Procedure to reset all minimum and maximum temperature/humidity data to current values.
Procedure to verify successful reception of outdoor temperature data from the sensor.
Advises on avoiding interference from electronic devices and metal surfaces for optimal signal reception.
Instructions for placing the main temperature station unit, including table stand and wall mounting.
Guidance on how to place the outdoor temperature sensor, including surface placement and wall mounting.
Advises on avoiding extreme conditions, using soft cloths for cleaning, and avoiding solvents.
Provides detailed specifications for indoor/outdoor temperature and humidity measurement ranges.
Lists the required power supply for the station and sensor, and recommended battery life.
Outlines the 1-year limited warranty terms, coverage, and service procedures.
Provides contact details (address, phone, email, web) for warranty, technical support, and general inquiries.
