To Next PageTo Next Page
Need help?Do you have a question about the La Crosse Technology WS-9611U-IT and is the answer not in the manual?
General| Brand | La Crosse Technology |
|---|---|
| Model | WS-9611U-IT |
| Category | Weather Station |
| Display Type | LCD |
| Indoor Temperature Range | 32°F to 122°F (0°C to 50°C) |
| Outdoor Temperature Range | -40°F to 140°F (-40°C to 60°C) |
| Wireless Transmission Frequency | 433 MHz |
| Power (Base Station) | 3 x AA batteries (not included) |
| Power (Remote Sensor) | 2 x AA batteries (not included) |
| Humidity Range | 1% to 99% |
| Wireless Range | 330 ft (100 m) |
Describes the main weather clock display and its components.
Step-by-step guide for setting up the weather station with a single transmitter.
Instructions for setting up the weather station with multiple transmitters.
Details the five function keys on the weather station unit.
Guide on how to adjust the LCD contrast level.
Instructions for setting the correct time zone for accurate time display.
Instructions for positioning the weather station unit on a table or wall.
Guidance on placing the outdoor sensor for optimal signal reception.
Steps for a proper restart to resolve operational issues.
Guidance on the initial setup process for the weather station.
Instructions on how to set the alarm times.
Troubleshooting outdoor temperature and humidity readings.
Troubleshooting indoor temperature and humidity readings.
Information on viewing and resetting min/max data.
Troubleshooting issues with time and date display.
Guidance on addressing periodic beeping from the weather station.
Troubleshooting forecast icons and weather person display.
Troubleshooting issues with sunrise/sunset time display.
Troubleshooting issues with moon phase display.
Addressing issues with the overall display information.
Troubleshooting sensor and channel number indicator issues.
Troubleshooting missing or dashed indoor temperature/humidity readings.
Troubleshooting a blank indoor temperature/humidity display.
Troubleshooting OFL display for indoor temperature/humidity.
How to view the minimum and maximum indoor/outdoor records.
Procedure to reset the recorded minimum and maximum temperature/humidity values.
How to view min/max records from multiple outdoor sensors.
Troubleshooting inaccurate time display, including WWVB signal issues.
Explains forecast icon behavior and accuracy limitations.
Troubleshooting steps for a completely blank display on the weather station.
Troubleshooting missing segments on the display.
Information on the backlight behavior and activation.
Explanation for black marks on the display, not covered by warranty.
Information regarding battery leakage and prevention.
How to verify that the station is reading the correct sensor.
Troubleshooting issues with multiple sensors being detected.
