La Crosse WS-1025U User Manual

Model: WS-1025U www.lacrossetechnology.com/support Page | 1
Model: WS-1025U
Instruction Manual
DC: 091014
OUTDOOR WINDOW THERMOMETER
Get Started
Step 1: Grasp both ends of the mounting bracket and remove from the
window thermometer
Step 2: Use a screwdriver open the battery compartment.
Step 3: Remove the plastic tab from between the AAA battery and the
positive terminal. The display will become active.
Step 4: Replace the battery compartment door.
Step 5: Remove the protective film from the display of the thermometer.
Step 6: Set time (required so MIN/MAX temperature resets correctly).
Restart: If the display does not become active, remove the battery and check
that the entire plastic tab was removed. Reinsert the battery.
Mounting Bracket
Adhesive
Strips for
Window
Mounting
Battery Cover
1-AAA
(included)
Current
Temperature
(Fahrenheit only)
Minimum
Temperature
Resets at 8PM
Maximum
Temperature
Resets at 8AM
Buttons
Leg
Slot for
Leg

La Crosse WS-1025U Specifications

General

Brand	La Crosse
Model	WS-1025U
Category	Thermometer
Language	English

Summary

Outdoor Window Thermometer: Initial Setup

Get Started Guide

Step-by-step instructions for battery installation and activation.

Thermometer Operation and Settings

Setting the Clock

Instructions for setting the hours and minutes for accurate readings.

Window Installation

Steps for attaching the mounting bracket and unit to a window.

Max/Min Temperature Display

Explanation of maximum and minimum temperature display and resets.

Device Management and Specifications

Accuracy and Low Battery Indication

Information on measurement accuracy and low battery indicators.

Product Specifications and Care

Product specifications, cleaning, and maintenance recommendations.

Thermometer and Bracket Removal

Procedures for detaching the thermometer and its mounting bracket.

Support and Regulatory Information

Warranty and Support Information

Details on product warranty, technical support, and registration.

FCC Compliance Statement

Regulatory compliance and interference guidelines.