La Crosse WS9251 - Outdoor Temperature Transmitter; Installation and Battery Management; Battery Replacement in Transmitter; Battery Replacement in Weather Station

23
• Daily alarm function
• Weather forecast with weather tendency indicator
• Temperature display in degree Celsius (°C)
• Indoor temperature display with MIN/MAX recordings
• Outdoor temperature display with MIN/MAX recordings, time and date
• All MIN/MAX recordings can be reset
• Relative air pressure history for the past 12 hours
• Display of sunrise time, sunset time and sun duration time in 193 cities
• Display 8 moon phase icons with indicator throughout the year
• Outdoor signal reception intervals at 4 seconds
• LCD contrast setting
• Indoor and outdoor low battery indicators
• Table standing/wall mounting
The outdoor temperature transmitter
• Remote transmission of outdoor temperature to weather station by 868 MHz
• Shower proof casing
• Wall mounting case
• Mounting at a sheltered place. Avoid direct rain and sunshine
HOW TO INSTALL AND REPLACE BATTERIES IN THE TEMPERATURE TRANSMITTER
The outdoor temperature transmitter uses 2 x AAA, IEC LR3, 1.5V batteries. When the
batteries need to be replaced, the low battery symbol will appear on the LCD. To install
and replace the batteries, please follow the steps below:
1. Remove the cover.
2. Insert batteries, observing the correct polarity (see marking).
3. Replace the battery cover on the unit.
HOW TO INSTALL AND REPLACE BATTERIES IN THE WEATHER STATION
The weather station uses 2 x C, IEC LR14, 1.5V batteries. To
install and replace the batteries, please follow the steps
below:
1. Remove the cover at the back of the weather station.
2. Insert batteries, observing the correct polarity (see
marking).
3. Replace the compartment cover.
Note: Always wait for 2 minutes after removing the batteries
before reinserting, otherwise start up and transmission