To Next PageTo Next PageWhat to do if my La Marzocco Strada AV Coffee Maker displays 'Flow Meter 1 No Pulse'?
If the flowmeter alarm is displayed, push a button to turn off the alarm. This issue can occur if the coffee is packed too tightly, there's a blockage in the tubes, a malfunctioning water pump, a faulty valve, or a damaged flowmeter. Call a service technician to fix this problem.
What to do if my La Marzocco Strada AV Coffee Maker displays 'Steam Boiler Overheated'?
If the message 'Steam Boiler Overheated' is displayed, call an authorized service technician to repair this fault. The CPU also turns power off to the steam boiler.
What to do if my La Marzocco Coffee Maker displays 'Coffee Boiler 1 Overheated'?
If the message 'Coffee Boiler 1 Overheated' is displayed, call an authorized service technician to repair this fault. The CPU also turns power off to the coffee boiler.
What does 'Steam Boiler Autofill Failed' mean on my La Marzocco Strada AV, and how to fix it?
When the message 'Steam Boiler Autofill Failed' is displayed, the CPU shuts down and turns off power to the machine (see the parameter “Level Timeout”). Press the ON/OFF button to reset this error.
What does 'Invalid Password' mean on my La Marzocco Strada AV?
The error message 'Invalid Password' will be displayed anytime an incorrect password is entered. The machine comes back to the previous state.
What does 'Autofill In Progress' mean on my La Marzocco Coffee Maker?
No action is required when the message 'Autofill In Progress' is displayed. This message is only displayed to notify the operator of the active process.
What does 'Provide for the replacement' mean on my La Marzocco Strada AV Coffee Maker?
When the message 'Provide for the replacement' is displayed, perform the required maintenance operations on the water filter or replace it. No action is required on the espresso machine.
What to do if my La Marzocco Strada AV displays 'Coffee Boiler 1 Probe Failed'?
When the message 'Coffee Boiler 1 Probe Failed' is displayed, the CPU shuts down and turns off the machine. To reset this error, verify and reconnect the temperature probe.
What to do if my La Marzocco Coffee Maker displays 'Steam Boiler Probe Failed'?
When the message 'Steam Boiler Probe Failed' is displayed, the CPU shuts down and turns off the machine. To reset this error, verify and reconnect the temperature probe.
What does 'SB Filled?' mean on my La Marzocco Coffee Maker?
Push enter if Steam Boiler is filled. Verify the presence of water looking the sight glass.
General| Type | Espresso Machine |
|---|---|
| Pump Type | Rotary |
| PID | Yes |
| Pre-heating System | Yes |
| Programmable Doses | Yes |
| Hot Water Tap | Yes |
| Cup Warmer | Yes |
| Frequency | 50/60 Hz |
| Pressure Profiling | Yes |
| Group Heads | 1, 2, or 3 |
| Boiler Type | Dual |
| Coffee Boiler Capacity | 1.5 liters |
| Voltage | 220-240V |
| Water Source | Plumbed |
| Steam Wand | Yes |
| Group Type | Saturated |
Key safety points: sound pressure, use by persons with reduced capabilities, child supervision, keeping appliance out of reach.
Covers professional use, placement, outdoor use, electrical safety, handling, cleaning, usage guidelines, and avoiding hazards.
Overview of machine components: boilers, groups, cover, and water pump.
In-depth explanation of Steam Boiler, Coffee Boiler, Brewing Groups, Exterior Cover, and Water Pump.
Critical warnings regarding electrical safety, water temperature, fuses, grounding, and general usage.
Details on electrical connections, water supply, accessories, drain systems, water quality, and installation guides.
Procedure for filling boilers with water and bleeding air for initial setup.
Steps for brewing espresso, using portafilters, adjusting pump pressure, and notes on coffee preparation.
Process for steaming milk, releasing condensed water, and preventing backflow.
How to dispense hot water for tea and other drinks using the fixed nozzle.
Steps for cleaning groups, drain wells, filters, filter holders, diffuser screens, and nozzles.
Procedures for draining and depressurizing the steam boiler.
Procedures for safely shutting down, disconnecting from power and water systems.
Tasks like checking brew temp/pressure, switches, water hardness, and cleaning probes.
Tasks like replacing portafilters, inspecting valves, wiring, and safety switches.
Checking boiler condition and rinsing with a food-grade cleaning product.
Handling, avoiding water, cleaning, and environmental factors affecting scale accuracy.
Cleaning individual grids, filter holder weighing, drain tray cleaning, and removing electronic box.
Overview of programming, digital display, and keypad functions.
Step-by-step guides for turning the espresso machine on and off safely.
Setting programmed doses, brewing modes (pulse, mass, ratio), and scale configurations.
Configuring cleaning cycles, tea dose, coffee boiler temperature, and pre-infusion times.
Settings for language, units, machine name, clock, eco mode, and chrono function.
Configuring brew doses by weight/volume, selecting brewing modes, and scale calibration.
Adjusting steam/coffee boiler parameters, water filling sensitivity, and steam boiler safety tests.
Setting filter alarms, resetting parameters, updating machine firmware, and troubleshooting errors.
Describes common error messages and their corresponding solutions for machine issues.
