La Sommeliere CTPE142A+ - Controlling Output; Refrigeration Control; Heating Control (Winter System); Fan Control

43
Indicator light
Symbol
Status
Meaning
Light off
Alarm releasing
Graphite stopper filter needs changing
Light on
Graphite stopper filter needs changing
Light off
Alarm releasing
Screen locked
Light on
Keyboard locked
Light off
Keyboard lock releasing
V. Output of controlling
1) Refrigeration control
When measured temp is above (so warmer than requested), compressor should turn ON
When measured temp is below (so cooler than requested) compressor should turn OFF
2) Heating control (winter system)
According to initial information as soon as real temp is 2°C below the set value, heating system starts to operate. The heater is going
to stop working in winter if the surrounding temperature of the wine cabinet is or above 12℃.
Attention: the compressor and the heater strip are going to run at least 1 minutes after set on.
3) Fan control
The fan starts to work when the compressor or the heater works.
The fan stops to work when the compressor or the heater stops.
4) Alarming
The alarms will turn on 1 minute after detecting an abnomal temperature.
To stop alarm ringing : press a touch on the display (whatever the touch), the alarm will stop ringing.
Humidity turn on/off display content
To change hygrometry alarm status, press at the same time both touch “SET” and “UP” for 3 seconds.
When turn on the humidity voice alarm，on the display humidity place will display ON for seconds，this mean the humidity voice
alarm will work.
When turn off the humidity voice alarm, on the display humidity place will display OF for seconds，this mean the humidity voice
alarm will stop work。
5) Back light energy-saving mode