Need help?Do you have a question about the La Spaziale S1 Vivaldi and is the answer not in the manual?
General| Boiler Type | Dual Boiler |
|---|---|
| Pump Pressure | 15 bar |
| PID Temperature Control | Yes |
| Hot Water Dispenser | Yes |
| Voltage | 110V |
| Group Head | 53mm |
| Pre-infusion | Yes |
| Steam Wand | Yes |
Details the differences between 15A and 20A machine versions and their operational modes.
Guides on unpacking, securing feet, checking screws, and connecting water supply prior to operation.
Step-by-step instructions for powering on, heating process, and monitoring indicator lights.
Explains how to adjust and control the group water temperature for optimal espresso extraction.
Method for broad temperature adjustments in 5°C increments using control buttons.
Details how to fine-tune temperature in ±3°C increments using specific button sequences.
Step-by-step instructions for preparing and brewing espresso shots with the machine.
Instructions on how to program single and double shot volumes using the machine's buttons.
Details the procedure for dispensing hot water from the machine.
Guide on how to use the steam wand for heating beverages like milk.
Explains different modes for boiler operation, including economy and default settings for energy saving.
Describes alarm conditions and indicator lights for a damaged flow meter.
Details blocking alarm for short-circuited or interrupted group temperature probes.
Explains non-blocking alarm for short-circuited or interrupted boiler temperature probes.
Describes blocking alarm for continuous conduction of the group heating element triac.
Details blocking alarm for continuous conduction of the boiler heating element triac.
Explains the blocking alarm triggered by the automatic refill system failure.
Shows the overall electrical layout and component connections within the machine.
Illustrates how various components connect to the central control board.
Details the connections on the triac boards responsible for heating elements.
Shows how the control panel interfaces with the internal electronics.
Provides a glossary of terms and abbreviations used in the wiring diagrams.
Provides methods for cleaning the machine's outer surfaces with a damp cloth.
Details the process for cleaning the group head and shower screens regularly.
Instructions on testing and adjusting the group pressure using a portafilter gauge.
Guidance on adjusting the expansion valve to regulate system pressure.
To Next Page
