1
Before Use
Thank you for purchasing a Labcold Vaccine and Sample Carrier. Although great care has been
taken in the manufacture of your carrier, damage can occur in transit. Before using for the rst
time please remove all packaging and give your carrier a thorough visual inspection.
The packaging should contain:
1 x Vaccine/ Sample Carrier
1 x Insulating Pad
1 x Metal Divider
2 x Power cables (one mains, one vehicular)
1 x Carrying Strap
If any damage is suspected or contents are missing, please contact your retailer immediately
upon receipt of the product. Failure to do so may invalidate you warranty.
WARNING! If either power supply cords are damaged, they MUST be replaced by the
manufacturer, it’s service agent or similarly quali ed persons in order to avoid a hazard
A Closer Look
To Next Page
Loading...