Need help?Do you have a question about the LabelMill PRINT & APPLY LM3606 and is the answer not in the manual?
Provides an overview of the LabelMill LM3606 thermal printer and applicator system.
Details the technical specifications of the LM3606, including print speed, label size, and interfaces.
Lists the components included with the LM3606 system and tools required for assembly.
Identifies and shows the location of major components of the applicator system.
Outlines the responsibilities of the user regarding the operation and maintenance of the equipment.
Critical safety precautions and warnings for operating the LM3606 system to prevent injury.
Step-by-step instructions for correctly routing the label web through the applicator system.
Guidance on how to load labels into the thermal print head of the applicator.
Instructions for loading thermal ribbon into the print engine for printing operations.
Information on the take-up unit assembly and its location on the backside of the main panel.
Procedures for adjusting the clutch assembly to control web tension for optimal performance.
Overview and description of the Hand Held Labeler Interface (HLI-100) controls and display.
Details the various accessory connection ports located on the back of the labeler control enclosure.
Information about the T-52 Photo Eye sensor, used as a remote trigger for the system.
Instructions for adjusting the air assist tube for proper label application clearance and angle.
Description and image of the optional T-150 mobile mounting stand for the applicator.
Guidance on adjusting the column crank and column lock for the T-stand.
Explanation of Tamp Duration and flow control adjustments for the tamp unit.
Details on adjusting various regulators (main air, flag, vacuum, air assist) for optimal performance.
Visual representation of the optional Tamp Applicator configuration for the system.
Details on how to perform all programming via the HLI-100 keypad and display.
Information on the System Editor function for configuring the device.
Overview of the different menu structures available for programming the system.
Glossary of terms and definitions used within the system's operation and programming.
Step-by-step guide for initial setup of key features and basic operation.
Detailed explanation of the logic board and input/output signals for system integration.
Guide to identify and resolve common operational problems and system malfunctions.
List of displayed fault messages and their corresponding corrective actions.
Instructions for safely replacing the main power fuse for the equipment.
To Next Page
General